intercalation of lithium into ag-cnts sample is reported here. we have used a nano-porous silver foam as a frame for deposition of the cnts   inside   the   pores   by   electrophoresis   deposition   (epd) technique. by using  chronopotentiometry method,  we  have noticed that the li storage capacity of the prepared ag-cnts electrode was improved  noticeably  in  comparison  with  literature. ...

Electrophoretic deposition of carbon nanotubes (CNTs) using alternating current electric fields (0.01-1000 Hz) is reported. Pure acetone was used as suspending medium. Two parallel gold electrodes were used as depositing substrate. The effect of depositing parameters such as frequency and three waveforms (sinusoidal, rectangular and triangular) on deposit yield was investigated. According to ou...

the purpose of this study was to investigate the deposition of the hydroxyapatite (ha) coating via the electrophoresis procedure. the ha deposition was performed in an ethanol, methanol, acetone and isopropanol suspension. methanol was found to be the best deposition media. among the different environmental conditions, including the encapsulation of the samples under two vacuum types of pressur...

Deposition of ceramic nanoparticles (dispersed in a non-aqueous suspension) on in-plane electrodes and under the influence of AC electric fields in the frequency range of 0.01 Hz - 10 kHz is investigated. Analysis of the particle response to the applied field is a difficult task due to the mutual effect of electric- and hydrodynamic force which are present in the system. In this work, however, ...

Intercalation of lithium into Ag-CNTs sample is reported here. We have used a nano-porous silver foam as a frame for deposition of the CNTs   inside   the   pores   by   electrophoresis   deposition   (EPD) technique. By using  chronopotentiometry method,  we  have noticed that the Li storage capacity of the prepared Ag-CNTs electrode was improved  noticeably  in  comparison  with  literature. ...

     The purpose of this study was to investigate the deposition of the hydroxyapatite (HA) coating via the electrophoresis procedure. The HA deposition was performed in an ethanol, methanol, acetone and isopropanol suspension. Methanol was found to be the best deposition media. Among the different environmental conditions, including the encapsulation of the samples under two vacuum types of pr...

The validity of a simple chronoamperometric technique for measuring the electrophoretic mobilities of colloid particles has been established by comparison of the results with those obtained from photon correlation spectroscopy, a well established method. Resolution of several flaws in the theory underlying chronoamperometric electrophoresis has led to a rationale of electrophoretic deposition b...

Fine zinc oxide particles were electrophoretically deposited  on alumino-ferro-chrome substrates. The deposition was carried out in a cylindrical ZnO/acetone electrophoresis cell. The deposits were dried and sintered at 1030³C in air. The process resulted a porous polycrystalline ZnO cladding over the alloy core. Comb shaped silver electrodes were formed and fired at 350³C. The variation of dev...

Pd nanoparticles were prepared with reverse micelles of water/AOT/isooctane solution and deposited onto silicon or InP substrates by electrophoresis. A large change of capacitance-voltage characteristics of mercury contacts on a semiconductor was found after Pd deposition. This change could be modified when the Pd deposition is followed by a partial removal of the deposited AOT. The deposited P...