Brush-electroplated nickel coating has been widely applied to repair and remanufacture ferrous metal component. Generally, the nickel coating has thickness from 0.05 mm to 0.2 mm, and it is also ferromagnetic like iorn metals. Therefore, the traditional supersonic thickness tester and eddy current thickness tester are not competent to measure the nickel coating thickness on iron or steel metal ...

Electroplated nickel coating on cemented carbide is a potential pretreatment technique for providing an interlayer prior to diamond deposition on the hard metal substrate. The electroplated nickel coating is expected to be of high quality, for example, indicated by having adequate thickness and uniformity. Electroplating parameters should be set accordingly for this purpose. In this study, the ...

The relative sensitivity of standard gold microelectrodes for electric cell-substrate impedance sensing was compared with that of gold microelectrodes coated with gold nanoparticles, carbon nanotubes, or electroplated gold to introduce nano-scale roughness on the surface of the electrodes. For biological solutions, the electroplated gold coated electrodes had significantly higher sensitivity to...

In this study, different amounts of MoS2 particles and an anionic surfactant were added to the conventional chromium electroplating bath in order to electrodeposite crack-free chromium coatings and the structure, morphology, tribology and corrosion behavior of the deposited coatings were investigated using X-ray diffraction spectroscopy, scanning electron microscopy, pin on disk ...

In this study, functionally graded Ni-Al2O3 composite coating (FGN-A) has been produced from nickel Watt’s bath containing different concentrations of Al2O3 particles. For this, different composite coatings were electroplated in the same bath with different particles concentration to find the optimum concentration of particles in which the maximum content with uniform distribution of Al2O3 part...

The objective of this study was to improve the oxidation resistance of electroplated Ni-Cr coatings by introducing a fine dispersion of yttria (Y2O3) nanoparticles to the coatings. A technique was developed to produce Y2O3 nanoparticles nm in size. Electroplating conditions were also investigated and it was found that pulse plating could produce high quality coatings without cracking. The Y2O3 ...