for a fiber optical surface plasmon resonance (spr) sensor a short part of its cladding should be removed to coat a thin layer of a metal. usually this is problematic when an optical fiber with small core diameter is used. in this paper, a new method using µliter droplet of the hf acid for short fiber optical taper fabrication is reported. using this method in a multi-mode optical fiber with th...

For a fiber optical surface plasmon resonance (SPR) sensor a short part of its cladding should be removed to coat a thin layer of a metal. Usually this is problematic when an optical fiber with small core diameter is used. In this paper, a new method using µliter droplet of the HF acid for short fiber optical taper fabrication is reported. Using this method in a multi-mode optical fiber w...

Cylindrical or taper-and-cylinder combination optical fiber probe based on evanescent wave has been widely used for immunofluorescence biosensor to detect various analytes. In this study, in contrast to the contradiction between penetration depth and analyte diameter of optical fiber probe-based evanescent wave, we demonstrate that double-taper optical fiber used in a radiation wave-based all-f...

Optical fiber tapers are used to collect photoluminescence emission at approximately 1.5 microm from photonic crystal cavities fabricated in erbium doped silicon nitride on silicon. In the experiment, photoluminescence collection via one arm of the fiber taper is enhanced 2.5 times relative to free space collection, corresponding to a net collection efficiency of 4%. Theoretically, the collecti...

We demonstrate a 1.5-microm - wavelength fiber laser formed by placement of glass microsphere resonators along a fiber taper. The fiber taper serves the dual purpose of transporting optical pump power into the spheres and extracting the resulting laser emission. A highly doped erbium:ytterbium phosphate glass was used to form microsphere resonant cavities with large gain at 1.5microm . Laser th...

We show that high-Q whispering-gallery modes in fused-silica microspheres can be efficiently excited by an optical fiber taper. By adjusting the taper diameter to match the ropagation constant of the mode in the taper with that of the resonant mode of interest, one can couple more than 90% of the light into the sphere. This represents a significant improvement in excitation efficiency compared ...

Optical fiber taper waveguides are used to improve the efficiency of room temperature photoluminescence measurements of AlGaAs microdisk resonant cavities with embedded self-assembled InAs quantum dots. As a near-field collection optic, the fiber taper improves the collection efficiency from microdisk lasers by a factor of 15–100 times in comparison to conventional normal incidence free-space c...

We describe a novel scheme based on evanescent guided-wave coupling for optically interfacing between conventional fiber-optic and planar photonic crystal devices such as waveguides and resonant cavities. By considering the band structure of bulk photonic crystal slabs, we analyze the k space properties of a linear defect waveguide and establish a set of design rules to ensure efficient evanesc...

Development of efficient and sensitive motion transducers for arrays of nanoelectromechanical systems (NEMS) is important for fundamental research as well as for technological applications. Here, we report a single-wire nanomechanical transducer interface, which relies upon near-field optomechanical interactions. This multiplexed transducer interface comes in the form of a single-mode fiber tap...

A simple low-cost Y-branch plastic optical fiber (POF) coupler which can be assembled easily by the end users has been developed. The acrylic-based Y-Branch POF coupler consists of input POF fiber, a middle high index contrast waveguide taper and output POF fibers. The optical device is based on a 1 × 2 Y-branch coupler design with a middle high index contrast waveguide taper. Nonsequential ray...