the performance of asphaltic pavements during their service life is highly dependent on the mechanical properties of the asphaltic layers. therefore, in order to extend their service life, scientists and engineers are constantly trying to improve the mechanical properties of the asphaltic mixtures. one common method of improving the performance of asphaltic mixtures is using different types of ...

in this research the possibility of vine pruning fibers in combination with wood fibers was studied in order to fabricate medium density fiberboard. vine pruning fibers content in three levels of 0/100, 30/70 and 60/40 (weight percent) and press time in three levels of 4, 5 and 6 minutes were as variable factors. one layer panels with a density of 0.65 g/cm3 and thickness of 15 mm were made. th...

introduction: to recognize the myelinated nerve fibers of the external and extreme capsules in human brain. materials and methods: 10 adult and normal brains (20 hemispheres) from both sexes were studied using 15 mm serial secions in all three cardinal planes after fixation and processing. these sections were stained by klüver – barrera and heidenhin – woelcke methods. results: some fibers from...

The application of fibers to reinforce cementitious materials is a well-known subject. At first, asbestos fibers are used in industrial process to produce fiber reinforced cement sheets. Thereafter, various types of synthetic fibers are produced and used as asbestos substitutes. The aim of the present work is to evaluate the effect of synthetic fibers on the flexural behavior of cementitious co...

The capture efficiency of the small aerosol particle is strongly influenced by the structure of fibrous layers. This study presents particle deposition and dendrite formation on different arrangements of binary fibers. 2-D numerical simulation is performed using the open source software of OpenFOAM. In the instantaneous filtration of a single fiber, obtained results are in good agreement with th...

However, problems such as osteoporosis due to high elasticity of metals relative to bones, and local infections and systemic problems caused by releasing metallic ions have motivated research on replacing metallic screws with non metallic ones. In this study, the composite containing poly-l-lactic acid and bioactive glass fibers were considered for the design of the screw using ABAQUS software ...

introduction: today, have been approved scientifically relationship between presence of asbestos fibers in the human respiratory area and malignant diseases such as lung advanced fibrosis (asbestosis), gastrointestinal, lung and laryngeal cancers. the aim of this study was the determination of asbestos fibers concentration in yazd city’s air in the summer of 2015. methods: this is a descriptive...

In this work, raw fibers of a local species of stabraq (milkweed) were scoured, bleached and blended with cotton fibers with a ratio of 75/25 (cotton/stabraq). The improved stabraq fibers, scoured and bleached cotton and the blended fibers were spun into fine yarns and then they were subjected to dyeing with two types of reactive dyes namely, cold brand and high exhaustion brand reactive dye at...

abstract introduction: interferential current is one of the most popular kinds of electrical stimulation that are used in electrotherapy. despite its clinical popularity, there have been limited studies to investigate how this stimulation protocol affects the nerve fibers. this study was aimed to develop a realistic model for the stimulation of nerve fibers by interferential currents and using ...