the effect of impact modifier on creep behavior of wood flour- recycled polypropylene composites has been evaluated in this work. for this purpose, impact modifier (ethylene vinyl acetate) and recycled polypropylene were mixed with wood flour (50/50% w/w) as well as the impact modifier (0, 3%, 6% and 9%) by a counter-rotating twin-screw extruder to manufacture the wood flour- recycled polypropy...

This paper summarizes and presents research progress on the fundamentals of the development of creep damage constitutive equations for high Cr steels including 1) a brief summary of the characteristics of creep deformation and creep damage evolution and their dependence on the stress level and the importance of cavitation for the final fracture; 2) a critical review of the state of art of creep...

2) It is not true that determination of the "final" creep value from the plot of I/C versus I/~ gives too little weight to the long time creep data and too much weight to the short-time creep data. The opposite appears to be true. The y-intercept (i.e., point_i/~ ÷ 0) is very close (in the horizontal direction) to the points for high t (Fig. 4) and is, therefore, influenced by an error, e I, at...

We study the internal dynamical processes taking place in a granular packing below yield stress. At all packing fractions and down to vanishingly low applied shear, a logarithmic creep is observed. The experiments are analyzed using a viscoelastic model which introduces an internal, time-dependent, fluidity variable. For all experiments, the creep dynamics can be rescaled onto a unique curve wh...

PURPOSE The aim of this study was to identify the presence of collagen-binding integrin subunits in human scleral fibroblasts (HSFs) and investigate their actual functions in maintaining the mechanical creep properties of the HSFs-seeded collagen matrix. METHODS Primary HSFs were cultured in vitro. Reverse- transcription PCR was used to detect mRNA expression of integrin α1, α2, and β1 subuni...

Recent experimental studies of the hot isostatic consolidation of Ti-6Al-4V–coated SiC fibers contained in cylindrical canisters have revealed an unexpectedly high rate of creep densification. A creep consolidation model has been developed to analyze its origin. The initial stage of consolidation has been modeled using the results of contact analyses for perfectly plastic and power-law creeping...

the creep/recovery behavior of wood flour-polypropylene was compared with medium density fiberboard (mdf) and particleboard. for this purpose, wood flour-polypropylene composites (with and without compatibilizer)were manufactured by using a laboratory twin-screw extruder. the mdf and particleboard panels were obtained from local producers. short term flexural creep tests at 30% of ultimate bend...

the effect of temperature on the viscoelastic behavior of chicken meat frankfurters was assessed by creep recovery tests. compression creep-recovery tests were performed at room temperature (20°c) and refrigeration (5°c) on samples of cylindrical shape. the viscoelastic behavior of samples was characterized based on the parameters of the four-element burgers model. during the compression phase,...

Stimulated by the excessive deflections and collapse of the KB Bridge of world-rercord span, the deflection histories of 56 similar bridges, most of them excessive, have been collected by RILEM TC-MDC. They amount to a wake-up call: The standard creep recommendations of engineering societies have been misleading, and thus their revision is imperative. They also confirm a simple feature: The mul...