a  commercial  ti-nanoxide  was  deposited  on  in-doped  sno2 (ito) polymer  substrates by  tape casting  technique with different thicknesses  (7,  14  and  36μm)  to  be  used  as  photoelectrode  in flexible  dye-sensitized  solar  cells  (dsscs).  ruthenium  dye  was adsorbed on each tio2 film for 24 h. the resulting photoelectrodes were used to form flexible dsscs in combination with elec...

This study investigates novel deposition techniques for the preparation of TiO2 electrodes for use in flexible dye-sensitized solar cells. These proposed new methods, namely pre-dye-coating and codeposition ultrasonic spraying, eliminate the conventional need for time-consuming processes such as dye soaking and high-temperature sintering. Power conversion efficiencies of over 4.0% were achieved...

A  commercial  Ti-Nanoxide  was  deposited  on  In-doped  SnO2 (ITO) polymer  substrates by  tape casting  technique with different thicknesses  (7,  14  and  36μm)  to  be  used  as  photoelectrode  in flexible  dye-sensitized  solar  cells  (DSSCs).  Ruthenium  dye  was adsorbed on each TiO2 film for 24 h. The resulting photoelectrodes were used to form flexible DSSCs in combination with...

We demonstrate a polarizer-free electro-optical switch using dye-doped liquid crystal (LC) gels. The mechanism of dye-doped LC gels mainly involves the combination of polymer scattering and dye absorption. However, the domain size of polymer networks, dye concentration, LC concentration, and fabrication process can all affect the phase separation process and thus result in dye-doped LC gels wit...

The Dye-sensitized nanocrystaline TiO2 solar cell (nc-DSC) developed by Grätzel [1] has the potential to reach low costs in future outdoor power applications. In addition, due to its expected ease of production and possibilities to adjust its appearance, the potential for application is very broad. When plastic foil is used as a substrate for the nc-DSC the production and application possibilit...

A polarizer-free flexible and reflective electro-optical switch using dye-doped liquid crystal (LC) gels is demonstrated. The electro-optical performances of both scattering and absorption based dye-doped LC gels depend on curing temperatures due to domain sizes of polymer networks. Such flexible electro-optical switch is bendable and trim-able because of the vertical polymer networks and gel-l...

Flexible Dye-sensitized solar cells were assembled using flexible transparent electrodes as substrates, nanocrystalline TiO2, an electrolyte based on I3/I, dye molecules and a counter electrode. In this study has been employed natural pomegranate juice for sensitization of nanocrystalline TiO2 and gold layer as counter electrode was prepared by sputtering method on conducting substrates polymer...

Lasing action in a fully organic dye doped flexible 1D random multilayer photonic crystal is reported. The emission energy can be modulated by varying layers thicknesses to fit the dye characteristics, thus showing the potential interest of such cheap materials in active devices for optoelectronic applications.

Förster resonance energy transfer (FRET) is an important tool for studying the structural and dynamical properties of biomolecules. The fact that both the internal dynamics of the biomolecule and the movements of the biomolecule-attached dyes can occur on similar timescales of nanoseconds is an inherent problem in FRET studies. By performing single-molecule FRET-filtered lifetime measurements, ...