gas sensitive metal oxide layers used in fabrication of resistive gas sensors are prepared by different deposition techniques. the technical data reported on some basic and practically important specifications of these devices, although fabricated based on the same gas sensitive oxide, are anomalously different. the influence of the fabrication technique used for the deposition of the gas sensi...

The design and optimization of nanostructure-based surface acoustic wave (SAW) gas sensor is analyzed based on TiO2 sensing layer and modified electrode dimensions. The sensitivity of the gas sensor depends upon the type of sensing layer used and active surface area obtained by varying the aspect ratio. The performance of the sensor is observed from 0.1ppm to 100ppm concentration of ...

zno nanostructures of different methods and sizes were grown in a controlled manner using a simple hydrothermal and sonochemical technique. controlling the content of concentration and temperature of the reaction mixture, spherical nanoparticles zno structures could be synthesized at temperatures 100-150 °c with excellent reproducibility in solvothermal and at different power and time in sonoch...

  A novel compact fiber-coupled NIR system based on a DFB diode laser source is employed as a portable and sensitive gas sensor for trace detection of combustion pollutant molecules. We demonstrate the performance of such an NIR gas sensor by tracing the absorption lines of CO and CH4 using 2f-WMS technique at moderate temperature of T ~ 600°C in the recuperator channel of an industrial furnace...

the pellet-type sno2 sensor was synthesized by the solid state method and the effects of additives such as nano zno (1-12 mol %) and nano in2o3 (1-10 mol %) on the co gas sensitivity of sensor were investigated. the optimum sintering temperature was chosen 800°c because of the porosity content of the samples. the phase analysis and microstructure of the samples were studied by x-ray diffraction...

copper sulfate was used as a precursor to prepare cuo nanoparticles in reverse micelles (o/w microemulsion).  this is a technique which allows the preparation of ultrafine metal oxide nanoparticles within the size ranging from 50 to 60 nm. the preparation of nano copper (ii) oxide studied was investigated in the inverse microemulsion system. therefore the nucleation of metal particles proceeds ...

zno and zno: mn nanocrystals were synthesized via reverse micelle method. the structural properties of nanocrystals were investigated by xrd. the xrd results indicated that the synthesized nanocrystals had a pure wurtzite (hexagonal phase) structure. resistive gas sensors were fabricated by providing ohmic contacts on the tablet obtained from compressed nanocrystals powder and the installation ...

in this study, a specific ch4 sensor is fabricated based on interdigitated electrode that modified with core-shell of tungsten carbide/tin oxide (wc/sno2) nanoparticles by wet chemical method in different percents of carbon and tungsten. the morphology of wet chemical-synthesized wc/sno2 core-shell was evaluated by different methods such as patterned x-ray diffraction (xrd), and particle size a...

The electrochemical sensor for detecting hydrogen sulfide was fabricated. H2S gas molecules pass through polytetrafluoroethylene membrane with 0.22 mm pore size. Carboxylated multi-walled carbon nanotubes (MWCNTs-COOH) were used to fabricate working and counter electrodes. It can be seen from Field Emission Scanning Electron Microscopy (FESEM) images of the working electrode that...