nanostructured alumina thin films were coated on stainless steel by sol-gel dip coating method. in order to prevent crack formation, al2o3 films were kept in a solvent bath immediately after coating to reduce the rate of drying. effects of calcination temperature and withdrawal speed on structural properties were analyzed using xrd and sem. topography and thickness of coatings were analyzed by ...

to improve the corrosion protection of copper metal, 0.01m concentration of 1h-1,2,4-triazole-3-thiol (tat) was incorporated into the hybrid sol-gel monolayers containing 3-glycidoxypropyltrimethoxysilane (gptms) and tetraethoxysilane (teos). it was further subjected to hydrolysis and condensation reaction to form a sol-gel matrix. the tat-doped hybrid sol-gel coating was applied over the coppe...

this article describes the preparation and analysis of nano hydroxyapatite (ha) films on stainless steel 316l through sol-gel technique. the process started with preparation of a nitrate and phosphate sol. after aging the sol for 24 h at room temperature a ss316 substrate was dip-coated and heat-treated at 350 to 450 °c for different times in air. the coating phase and structure on substrate we...

the aim of this work is to synthesize and investigate the performance of yttria-doped zirconia solgelcoatings in the chemical corrosion prevention of zircaloy-4 (zirconium alloy) in a 1 n h2so4environment. the influence of four different molar ratios of water to alkoxide, namely 1, 4, 12, and20, on the coating quality and its corrosion prevention performance was investigated. differentialtherma...

the synthesis of titania via sol-gel method has been widely studied. in the present work, titania was deposited onto a titanium substrate via sol-gel method. different processing parameters such as the repetition number of dipping/heat treatment process and dipping time have been studied to obtain the homogenous titania coating. phase and microstructural evaluation of the powder and coating sam...

as we know sol-gel is one of the most important techniques for thin film preparation. in this paper, high transmission silica thin films have been prepared by dip-coating process from a new silicon-alkoxide solution. the prepared sol was stable for 45 days which is very important to characterize the coating process. the optical properties as a function of aging time, withdrawal rate, and heat t...

We present a dip-coatable, high-capacitance ion gel dielectric for scalable fabrication of three-dimensional (3D) electrowetting-on-dielectric (EWOD) devices such as an n × n liquid prism array. Due to the formation of a nanometer-thick electric double layer (EDL) capacitor, an ion gel dielectric offers two to three orders higher specific capacitance (c ≈ 10 μF/cm²) than that of conventional di...

We report on the fabrication and characterization of thick UV-patternable hybrid sol-gel films by spin coating using a modified sol-gel process. Thick coating of 25 microns with crack-free surface can be produced by one spin coating step. Thick layers of more than 100 μm can be obtained with a multi-coating process. Characterization using different techniques including optical microscope and at...

OBJECTIVE The purpose of this study was to evaluate the effect of tooth coating material and finishing agent on bleached enamel surfaces after using KTP laser with 27% hydrogen peroxide. BACKGROUND DATA There have been few reports on the effects of tooth coating materials and finishing agents after bleaching. METHODS After 40 crowns of human extracted maxillary incisors were bleached by KTP...

Development of effective electrical magnetohydrodynamic (MHD) coating insulating induced current path is one of key fusion technologies for fusion blanket research and development. Electrical insulation coating is extremely important for lead lithium (PbLi) MHD thermofluid study from pointview of secure electric insulating wall condition. The alumina (Al2O3) coatings fabricated by a sol-gel met...