Consumption of endophyte-infected tall fescue during summer months can result in severe hyperthermia in cattle. Six heifers (296+/-8.3 kg BW) were used to determine changes in body temperature control that occur with consumption of an endophyte-infected tall fescue diet during controlled heat challenge. All animals were exposed in five separate periods to a step increase in ambient temperature ...

in this investigation, fluor-hydroxyapatite (fha) film was deposited on a titanium substrate by sol-gel method. triethyl phosphite, ammonium fluoride and calcium nitrate in ethanol solutions were used respectively as p, f and ca precursors. typical apatite structures were obtained for all coatings after dipping and subsequent heat treatment at 550, 700 and 800 ºc, the coating layers were invest...

The objective of this work was to evaluate the effect of heat treatment and compression on the swelling and surface roughness of Southern red oak (Quercus falcate Michx.) and Southern pine (Pinus taeda L.). Specimens were exposed to temperature levels of 110 °C or 200 °C for 8 h before they were compressed using 2.5 MPa pressure for 5 min. Swelling values of the control and heat-treated samples...

pistachio has a special ranking among iranian agricultural products. iran is known as the largest producer and exporter of pistachio in the world. agricultural products are imposed under different thermal treatments during storage and processing. designing all these processes requires thermal parameters of the products such as specific heat capacity. regarding the importance of pistachio proces...

Background & Aims of the Study: Heat Stress is a major factor in many industrials and heat stress is one of occupational hazards in the workplace and severely affects the health and productivity, heat stress can decrease efficiency, increase accidents and reduce safety levels. Aim of this study was comparing the heat stress indices of HSI and WBGT and core body temperature in steels ind...

In this study, the behavior of nanoparticles using a numerical model is discussed. For this study a model for the expansion in free convection heat transfer and mix in a rectangular container with dimensions of 1 × 4 cm using Nano-aerosols in the air is going when copper nanoparticles, use and by changing the temperature difference between hot and cold wall, we will examine its impact on the ra...

background : necessity of evaluating heat stress in the workplace, require validation of indices and selection optimal index. the present study aimed to assess the precision and validity of some heat stress indices and select the optimum index for using in heavy work activities in hot and dry climates. methods: it carried out on 184 workers from 40 brick kilns workshops in the city of qom, cent...

Bio-heat transfer is the study of external or internal heat transfer in the biological body. In different therapeutic treatments especially in cancer treatment, heat is used to cure infected cells. The required temperature that will kill the infected cell should be known before starting the thermal treatment on human tissue. The useful ways to measure the temperature distribution on human tissu...

TiO2 nano-particles were used in electroless plating bath to obtain Ni/P/nano-composite coatings. The coatings were heat treated at 200, 400, 600 and 700 oC and their chemical and physical properties were investigated and it was found that 400 oC was the optimum temperature for the heat treatment of the coatings. The micro-hardness test of coatings showed that t...

NiTi alloy wires are widely used in many applications for examples, orthodontic arch wires, mini screw implant, sensors, etc. Usually, wire drawing process is chosen to produce arch wires because of its high productivity as well as superior surface quality of the drawn wire surface. In the case of NITI arch wire, the cold work occurred during wire drawing operation also plays important role to ...