the aim of the present study was to investigate the effect of quenching and tempering temperatures on themicrostructure, mechanical properties and the wear characteristics of medium carbon-high chromium wear resistantsteel. in addition, the dominant wear mechanisms were studied. for this purpose, austenitizing and temperingtemperatures were selected in the ranges of 900- 1000 °c and 300- 500 °c...

This paper was aimed to address the modeling and optimization of factors affecting the corrosive wear of low alloy and high carbon chromium steel balls. Response surface methodology, central composite design (CCD) was employed to assess the main and interactive effects of the parameters and also to model and minimize the corrosive wear of the steels. The second-order polynomial regression model...

The aim of the present study was to investigate the effect of quenching and tempering temperatures on the microstructure, mechanical properties and the wear characteristics of medium carbon-high chromium wear resistant steel. In addition, the dominant wear mechanisms were studied. For this purpose, austenitizing and tempering temperatures were selected in the ranges of 900- 1000 °C and 300- 500...

The wear failure mode of a paver spiral blade was simulated by EDEM software. High-manganese steel, medium chromium alloy and high steel were selected as matrix materials; SiC particles WC surface particle reinforcement the prepared EPC process. performance mechanism analyzed microstructure, hardness, impact, pin disk, erosion test, morphology. Modeling with software applying discrete element a...

Several electrochemical deposition parameters affect grain orientations, which in turn, affect coating quality and coating performance. An enhanced x-ray pole figure technique has been applied to study grain distribution anisotropy in electrolytic high contraction and low contraction chromium. Temperature and current density are the most important factors controlling grain orientation. Producti...

Chromium oxide coatings were deposited on low-carbon steel by radiofrequency reactive magnetron sputtering at different oxygen flux values. X-ray diffraction, x-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy were used to investigate the microstructure of chromium oxide coatings. Varying oxygen flux changed the coating microstructure; as with increasing oxyg...

Electric discharge machining (EDM) is a ‘newer technology utilized to machine hard metals, alloys, composites and ceramics. This paper reports the experimental investigation carried out on EDM to study the effects of machining parameters such as pulsed current on material removal rate, depth of cut, overcut, tool wear (net weight lost) and hardness on En-31 tool steel The work material was elec...