conclusions the castings fabricated from the ringless technique with non-precious alloy are acceptable. this investing system is useable for the fabrication of fixed restorations. results after statistical evaluation, the following results were obtained: the mean vertical margin discrepancy for conventional investing was 156.72 ± 64.67µ; for the ringless technique it was 117.3 ± 26.77µ; and for...

The physical properties and shear bond strength of two resin-modified glass-ionomers: RMGIs (FJL and VT) and as a control, a conventional glass-ionomer: CGI (FJ), were evaluated. Ninety percent of the setting shrinkage under dry conditions and nominal hygroscopic expansion in water during 360 h occurred within the first 24 h. The nominal hygroscopic expansion of CGI was 0.38% while the RMGIs de...

The purpose of this study was to investigate the relationship between hygroscopic expansion and polymerization shrinkage for compensation of polymerization shrinkage stresses in a restored tooth. One resin-modified glass-ionomer (RMGI) (Ketac Nano, 3M ESPE), 2 compomers (Dyract, Dentsply; Compoglass, Ivoclar), and a universal resin-based composite (Esthet•X HD, Dentsply) were tested. Volumetric...

objective: to measure the long-term linear hygroscopic expansion (lhe) of several materials using bulked and layered techniques. materials and methods: seven materials were used; fuji cap ii, fuji ii lc, photac-fil aplicap, vitremer, dyract, tetric and z100. ten specimens (6×4 mm) were made for each material using layered and bulked techniques (each group comprises five specimens). the specimen...

The prediction of hygroscopic swelling of flexible polymer substrates is crucial in various fields from smart structures to flexible electronics. In this study, the prediction method for time-dependent hygroscopic deformation is presented by employing the finite element method (FEM). In order to precisely consider the strain gradients inside the substrate, moisture distribution depending on tim...

CREDIT is generally given to Taggart1 for introducing the cast gold inlay to the dental profession. Although he realized that gold shrinks when cooled from molten state to solid state of room temperature, the investment available to him did not supply sufficient compensation. In 1910, Van Horn2 published a paper dealing with a method by which he obtained the compensation by means of wax expansi...