the performance of a forced-liquid vertical tubular loop bioreactor (vtlb), a forced-liquid horizontal tubular loop bioreactor (htlb) and a gas-induced external airlift loop bioreactor (ealb) were compared for production of biomass from natural gas. hydrodynamic characteristics and mass transfer coefficients were determined as functions of design parameters, physical properties of gases as well...

the mixing behavior of the gas-liquid phase in three loop bioreactors was investigated. a gas-induced external airlift loop bioreactor (ealb), a forced-liquid vertical tubular loop bioreactor (vtlb) and a forced-liquid horizontal tubular loop bioreactor (htlb) were used for mixing studies as well as biomass production from natural gas. the effect of design parameters, riser to downcomer cross s...

The mixing behavior of the gas-liquid phase in three loop bioreactors was investigated. A gas-induced External Airlift Loop Bioreactor (EALB), a forced-liquid Vertical Tubular Loop Bioreactor (VTLB) and a forced-liquid Horizontal Tubular Loop Bioreactor (HTLB) were used for mixing studies as well as biomass production from natural gas. The effect of design parameters, riser to downcomer cro...

The performance of a forced-liquid Vertical Tubular Loop Bioreactor (VTLB), a forced-liquid Horizontal Tubular Loop Bioreactor (HTLB) and a gas-induced External Airlift Loop Bioreactor (EALB) were compared for production of biomass from natural gas. Hydrodynamic characteristics and mass transfer coefficients were determined as functions of design parameters, physical properties of gases as ...

A gas-liquid-solid inverse  uidization airlift bioreactor was proposed by combining advantages of external-loop airlift reactors and inverse  uidized beds. This airlift bioreactor comprises a gas-liquid riser, a gas separator, a liquid-solid inverse  uidized downcomer and a bottom connector. The effects of the gas velocity and the particle loading on the gas holdup in the riser and the liqui...

Several bioreactor systems are used for biological treatment of hydrogen sulfide. Among these, airlift bioreactors are promising for the bioconversion of hydrogen sulfide into elemental sulfur. The performance of airlift bioreactors is not adequately understood, particularly when directly fed with hydrogen sulfide gas. The objective of this paper is to investigate the performance of an airlift ...

For the first time three different natural compounds, isolated from hairy roots of Astragalus membranaceus, cultivated in airlift bioreactor were tested for their cytotoxic potential and apoptosis induction in a panel of human tumor cell lines. Root cultures, cultivated in bioreactor gave 18.5 g l(-1) dry wt roots with the highest astragaloside production in vitro up to now - 1.64% (astragalosi...

The key parameters of the inner structure of a cylindrical airlift bioreactor, including the ratio of the cross-section area of the downcomer to the cross-section area of the riser, clearance from the upper edge of the draft tube to the water level, and clearance from the low edge of the draft tube to the bottom of the reactor, significantly affected the biomass production of Botryococcus braun...

The performance of airlift bioreactors are closely related with their geometry, especially the gas-liquid separator design. In this study, the influence of the gas-liquid separator geometry on oxygen transfer and gas hold-up was evaluated in 10-L concentric-tube airlift bioreactor operating with distilled water and xanthan gum solution. The specific airflow rate (ɸAIR) exhibited the higher effe...