The influence of backwashing on biological perchlorate reduction was evaluated in two laboratory scale fixed bed biofilm reactors using 1- or 3-mm glass beads as support media. Influent perchlorate concentrations were 50 microg/L and acetate was added as the electron donor at a concentration of 2 mg C/L. Perchlorate removal was evaluated at various influent dissolved oxygen (DO) concentrations....

The success of many modelling studies strongly depends on the availability of sufficiently long influent time series the main disturbance of a typical wastewater treatment plant (WWTP) representing the inherent natural variability at the plant inlet as accurately as possible. This is an important point since most modelling projects suffer from a lack of realistic data representing the influent ...

Noroviruses, an important cause of gastroenteritis, are excreted by infected individuals and are therefore present in wastewater. We quantified norovirus genogroup I (GI) and GII in wastewater at different locations in France and evaluated removal by a range of treatment types, including basic (waste stabilization pond), current industry standard (activated sludge), and state-of-the-art (submer...

This paper presents the results of an evaluation of a toxicity mitigation control strategy using the IWA simulation benchmark (Copp et al., 2002; Copp, 2001). The aim of the proposed strategy is to minimise the impact of a toxic influent shock load on process performance. To do this, the strategy makes use of a respiration rate measurement to detect toxic events and uses an equalisation tank to...

Linear Quadratic Dynamic Matrix Control has been applied to the Benchmark Simulation Model 1 (BSM1) wastewater treatment plant to maintain the effluent quality within regulations-specified limits. Good performance was achieved under steady influent characteristics, especially concerning the nitrogen-related species. In presence of influent disturbances the behavior was less satisfactory but the...

Wastewater treatment plants (WWTP) typically have a service life of several decades. During this service life, external factors, such as changes in the effluent standards or the loading of the WWTP may change, requiring WWTP performance to be optimized. WWTP modelling is widely accepted as a means to assess and optimize WWTP performance. One of the challenges for WWTP modelling remains the pred...

Fixed bed biofilm reactors with granular activated carbon (GAC) or glass beads as support media were used to evaluate the influence of short-term (12h) and long-term (23 days) increases of influent dissolved oxygen (DO) concentrations on biological perchlorate removal. The goal was to evaluate the extent by which chemisorption of oxygen to GAC can enhance the stability of biological perchlorate...

Combined treatment of landfill leachate and municipal wastewater was performed in order to investigate the changes of leachate toxicity during biological treatment. Three laboratory A2O lab-scale reactors were operating under the same parameters (Q-8.5-10 L/d; HRT-1.4-1.6 d; MLSS 1.6-2.5 g/L) except for the influent characteristic and load. The influent of reactor I consisted of municipal waste...

Total suspended solids (TSS) are a major pollutant that affects waterways all over the world. Predicting the values of TSS is of interest to quality control of wastewater processing. Due to infrequent measurements, time series data for TSS are constructed using influent flow rate and influent carbonaceous bio-chemical oxygen demand (CBOD). We investigated different scenarios of daily average in...

We studied and quantified the elimination of sunflower oil from a wastewater influent using a biological treatment by activated sludge. Estimation of the biodegraded material was obtained doing a mass balance, and we conducted a follow-up of the different operational parameters and design. We delivered information about the operation of a system for treatment by activated sludge fed with an inf...