in this study caulerpa racemosa has been characterized and used for the removal of cd(ii) and pb (ii) from aqueous solutions. the effect of ph, adsorbent dosage, contact time and temperature on adsorption process was studied in batch experiments. langmuir and freundlich models were applied to describe the biosorption isotherm of the metal ions by c. racemosa biomass. the adsorption data can be ...

the aim of this study was to investigate the congo red sorption on soil from the region of iasi (ne of romania). the effects of contact time, temperature, sorbent dose and initial dye concentration on soi sorption were investigated. the results show that the amount adsorbed of congo red on soil increase with increasing dye concentration, temperature and contact time. the experimental data were ...

Parameters from single-component isotherm models were used in multicomponent isotherm models to predict the aqueous phase sorption of trichloroethylene (TCE) in the presence of tetrachloroethylene (PCE) in four zeolites, Tenax, and three natural solids. The Langmuir, the Polanyi-Dubinin, and the Freundlich or the Langmuir-Freundlich isotherm models were used to simulate single-component sorptio...

Comparison analysis of linear least-square method and non-linear method of three widely used isotherms (Langmuir, Freundlich, and Redlich-Peterson) were examined to experiment with Remazol Red (C.I. 18221) onto pistachio nut shells at a solution temperature of 293 K. All three isotherm equations showed a better fit to the experimental equilibrium data. The results show that the Langmuir model s...

The adsorption behaviour of Methyl violet and Auramine yellow from aqueous solution onto Stishovite clay was investigated as a function of parameters such as initial dye concentration, contact time, p and temperature. The Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms. Adsorption followed pseudo-second order model. The experimental data fitted well ...

adsorption of p-nitrophenol by three different activated carbons (f100, s.e.i. and b.d.h.) was carried out at 301 k and at controlled ph conditions. two different adsorption models (langmuir model and freundlich model) were studied and compared. the adsorption capacity of the carbons depends on the point of zero charge (pzc) and surface area of the carbons. adsorption of the solute at higher ph...

Rhizomucor tauricus, an industrial fungus, was immobilized in sodium alginate and used as adsorbent for the removal of nickel from aqueous solutions. The biosorption capacity of Ni(II) was found to be 394 mg/g of immobilized biomass. It was observed that an increase in pH from 3 to 6 increased the percent adsorption, and an increase in liquid-to-solid ratio from 2 to 10 increased the metal upta...

Thermodynamic studies on the bioadsorption of Cr(III) onto Agave lechuguilla biomass were conduced. The experimental results at different temperatures were modeled using the Langmuir and Freundlich isotherms to obtain the characteristic parameters of each model. Both the Freundlich and Langmuir models were found to represent the bioadsorption process. The average adsorption capacities calculate...

Adsorption of ammonia from anaerobic digester effluent by magnetically modified zeolite (MMZ) has been investigated using a batch technique and comparison of adsorption isotherm equations. Adsorption isotherm models were utilized to describe the equilibrium isotherms and the isotherm constants were calculated. The sorption of ammonia follows Langmuir, Freundlich and Dubinin-Radushkevich (D-R) m...

The adsorption of dyes in the solutions using activated sludge might be a promising approach in wastewater treatment units. The adsorption of Basic Red 18 and Basic Blue 9 from aqueous solution by dried activated sludge was investigated with in a batch system. The activated sludge had the highest dye uptake capacity, having the monolayer adsorption capacity 285.71 and 256.41 mg g(-1) for Basic ...