sawdust which is the main waste from wood industry has been used as a raw material forremoval of brilliant cresyl blue toxic dye. the effects of various parameters such as ph,electrolyte concentration, adsorbent dose, contact time and agitation rate were studied for theremoval of the dye in a concentration of 50 mg l-1. the optimum condition for the studiedparameters was applied for various con...

background: today, through various industrial processes, toxic heavy metals are released into aquatic environments that are harmful to the ecosystem. in the present investigation, removal of such contaminants from industrial wastewater is necessary. the purpose was made to extend an ecofriendly technology by using a bio carbon generated from sunflower waste biomass. methods: the impact of initi...

a batch adsorption study was applied to investigate the adsorption of pb2+ ions from aqueous solutionby nanographene (ng).the adsorption percentage of pb2+ions onto ng samples at different initial ph,contact time (tc), adsorbent dosage (mng) and temperature (t) were investigated. the results showedthat ng is an excellent adsorbent for pb2+ions removal from aqueous solutions with an adsorptionpe...

A batch adsorption study was applied to investigate the adsorption of Pb2+ ions from aqueous solutionby nanographene (nG).The adsorption percentage of Pb2+ions onto nG samples at different initial pH,contact time (tc), adsorbent dosage (mnG) and temperature (T) were investigated. The results showedthat nG is an excellent adsorbent for Pb2+ions removal from aqueous solutions with an adsorptionpe...

Sawdust which is the main waste from wood industry has been used as a raw material forremoval of Brilliant Cresyl Blue toxic dye. The effects of various parameters such as pH,electrolyte concentration, adsorbent dose, contact time and agitation rate were studied for theremoval of the dye in a concentration of 50 mg L-1. The optimum condition for the studiedparameters was applied for various con...

In the present work, the simultaneous determination of Brilliant green (BG) and Crystal violet (CV) dyes with overlapped absorption spectra in binary mixture solution, was carreid out using the partial least squares (PLS) and direct ortogonal signal correction-partial least squares (DOSC-PLS) methods. The results obtained indicate that by applying DOSC on the calibration and prediction data for...

In chromatographic separations involving elutes with large differences in the molecular size, the adsorption saturation capacities of the elutes may differ because of the differences in the degree of size exclusion. With uneven saturation capacities, isotherm crossovers may occur, which often results in selectivity reversal. In this work, a new multicomponent isotherm has been developed for thi...

A favorable isotherm open to the right to some extent is better than a linear isotherm to give shorter column height in pressure swing adsorption(PSA). We face to a problem how favorable isotherm is actually favorable in PSA operation. The purpose of this paper is to propose how to construct such a custom made isotherm which optimizes the PSA processes. The PSA mod...

Comparison analysis of linear least-square method and non-linear method of three widely used isotherms (Langmuir, Freundlich, and Redlich-Peterson) were examined to experiment with Remazol Red (C.I. 18221) onto pistachio nut shells at a solution temperature of 293 K. All three isotherm equations showed a better fit to the experimental equilibrium data. The results show that the Langmuir model s...

The sorption isotherm is important information for evaluating the ability of an adsorption system to treat the industrial waste water. In this study, eleven datasets from literatures were selected and three two-parameter and threeparameter equations were used to evaluate adsorption systems. Quantitative criteria included six error functions, and the quantitative criterion was residual plots. Is...