The prediction of aerodynamic characteristics and smart flap of airfoil under the ground effect are carried out by the integration of computational fluid dynamics. Considering different types of beams, a parametric bending profile of a smart flap is designed. Cantilever beam with uniformly varying load with roller support at the free end is considered in here. A pressure-based implicit procedur...

in this study, the effect of suction and the parameters such as suction amplitude, suction coefficient and suction jet length on naca0012 was evaluated. the turbulence employed model was the rsm model. suction jet is located in 10% of the chord length. the range of suction jet entrance velocity was selected from 0.1 to 0.5 of freestream velocity. the maximum increase in lift to drag ratio was s...

Numerical methods are not always convergent especially in higher velocities when shock waves are involved. A comparison analysis is performed to study the supersonic flow over conical bodies of three different cross sections circular, elliptic and squircle (square with rounded corners) shaped using  Perturbation techniques to find flow variables analytically. In order to find lift and drag forc...

in this study, a numerical computational fluid dynamics study is conducted in order to predict the aerodynamic forces on the np car. the turbulent air flow around the car is modeled using the realizable k-ε model. first, results are validated against those presented for the ahmed’s body. next, the fluid flow around the car is simulated for different car speeds ( to mph) and flow directions ( to...

In this study, a numerical computational fluid dynamics study is conducted in order to predict the aerodynamic forces on the NP car. The turbulent air flow around the car is modeled using the realizable k-ε model. First, results are validated against those presented for the Ahmed’s body. Next, the fluid flow around the car is simulated for different car speeds ( to mph) and fl...

The problem investigated in this experiment was which height of Gurney Flap gives the best lift improvement on an airfoil without increasing drag. The Gurney Flaps' heights are determined as a percentage of the airfoil's chord length. The hypothesis is that a Gurney Flap will produce the best lift to drag ratio when its height is two percent of the airfoil's chord length. The hypothesis was tes...

An experimentalinvestigation has been made of the subsonic lift, drag and longitudinal stability characteristics of models representing some alternative slender airbus configurations. For the same wing planform of aspect ratio 1.4 the lift, drag and pitching moment have been measured for two wings of maximum thickness/chord ratio 4 and 9 per cent respectively, both without and with various body...

Hypersonic rareŽ ed-gas  ows near two side-by-side plates have been studied numerically with the direct simulationMonte Carlo technique under transitional rareŽ ed-gas- ow conditions (Knudsen numbers from 0.024 to 1.8). Strong in uences of the geometrical factor (ratio of distance between plates to plate length) and the Knudsen number on the  ow structure (the shape of shock waves, the conŽ...

nowadays, we live in a world which quality, speed, accuracy and cost are the most important parameters in parts' design and manufacturing. due to the complexity of part manufacturing, traditional and nontraditional manufacturing techniques are used. aerodynamic tests usually requires one or several models for testing in wind tunnels and these models typically have particular complexities in whi...

Shape optimization of the airfoil with high aspect ratio of long endurance unmanned aerial vehicle (UAV) is performed by the multi-objective optimization technology coupled with computational fluid dynamics (CFD). For predicting the aerodynamic characteristics around the airfoil the high-fidelity Navier-Stokes solver is employed and SMOGA (Simple Multi-Objective Genetic Algorithm), which is dev...