The present study deals with the utilization of fines generated from comminution process (crushing, grinding and screening) of the Run of Mines into value added products i.e. fluxed iron ore pellets. The study comprises to understand the physical and mechanical behavior of five distinguished chemical compositions of green and dried iron ore pellets with respect to a typical Mini Blast furnace (...

Prevention and mitigation of acid rock drainage from mining are decisive for limiting environmental impact. Five by-products and industrial remnants (lime kiln dust, blast furnace slag, granulated blast furnace slag, cement kiln dust and fly ash) were investigated for their suitability to prevent acidity and metal(loid)s during leaching from highly sulfidic (50wt%, sulfide) waste rock in small ...

one of the most important stages in sugar industry that making wastewater and contamination is the water obtained to washing of co2 in mazoot furnace and related pumps. amount of water consumption in this stage is about 30 to 35 percent of weight of sugar beet, so amount of this stream is considerable. mixing of carbon black and water compose the colloid in liquid phase. these colloids do not s...

In this paper, the possibility of improving the global response of asphalt materials for pavement applications through the use of hydrated lime and Electric Arc-Furnace Steel Slag (EAFSS) was investigated. For this purpose, a set of asphalt mortars was prepared by mixing two different asphalt binders with fine granite aggregate together with hydrated lime or EAFSS at three different percentages...

Stabilisation/solidification (S/S) is an effective technique for reducing the leachability of contaminants in soils. Very few studies have investigated the use of ground granulated blast furnace slag (GGBS) for S/S treatment of contaminated soils, although it has been shown to be effective in ground improvement. This study sought to investigate the potential of GGBS activated by cement and lime...

air cooled blast furnace slag is a by product made of gradually air cooled molten blast furnace slag, and is often stored in stockpiles near the iron mills and usually occupy a wide area around the iron mills. from this perspective the further use of these materials can have its own merits. air cooled blast furnace slag can be used in asphalt mixtures because of their proper frictional properti...

This study explored the possibility of using upgraded coal and coke from Indonesian lignite in ironmaking process, specifically pulverized Injection (hereafter, “PCI”) carbon composite pellets material (sintering binder material). The found that (1) injection into blast furnace will have same effect as lime - heavy oil slurry furnace, combined infusion highly volatile matter low ash coal, flash...