recently, a large amount of studies have been related to nonlinear systems with multi-degrees of freedom as well as continuous systems. the purpose of this paper is to optimize passive vibration absorbers in linear and nonlinear states for an euler-bernoulli beam with a nonlinear vibratory behavior under concentrated moving load. the goal parameter in the optimization is maximum deflection of t...

Recently, a large amount of studies have been related to nonlinear systems with multi-degrees of freedom as well as continuous systems. The purpose of this paper is to optimize passive vibration absorbers in linear and nonlinear states for an Euler-Bernoulli beam with a nonlinear vibratory behavior under concentrated moving load. The goal parameter in the optimization is maximum deflection of t...

The mean vibration transmissibility values were measured for cotton work gloves commonly used in vibration-generating workplaces to evaluate the vibration isolating performance of cotton work gloves. The mean vibration transmissibility values of work cotton gloves were compared with those of four types of anti-vibration gloves measured in the same way. All the measurements were performed based ...

In this paper, a general linear time-varying multiple-axis (LTVMA) vibration model of shield tunnel boring machine (TBM) cutterhead driving system is established. The corresponding multiple inputs and multiple outputs (MIMO) state-space model is also presented. The linear vibration model is analysed, and the vibration-torque transfer function matrix and the vibration-torque static gain matrix a...

The Hilbert Transform (HT) and its properties, applied to the analysis of linear and non-linear vibrations, are discussed at great length in [1]. The application of the HT to a signal provides some additional information about amplitude, instantaneous phase and vibration frequency. This information is valid when applied to the analysis of non-linear vibration motions [2]. Moreover, it has been ...

a linear superposition method was used for modeling the time history of the production blast vibrations and optimizing the blast sequence to reduce vibration levels in sar-cheshmeh copper mine, kerman, iran. a single-hole blast for modeling and two double-hole blasts with time delays of 25 and 65 ms between two holes for modeling validation were carried out. the generated vibrations were measur...

The purpose of this paper is control of simply supported flexible core sandwich beam's linear vibration equipped with piezoelectric patches under different loads. The effects of external forces imposed on sandwich beam can be reached to a minimum value by designing an appropriate controller and control the beam's vibration. Three-layer sandwich beam theory is used for analytical modeling of san...

A defective vibration system is a special linear vibration system which can not be completely uncoupled by linear transformation. Previous studies have shown that the modal models of defcctiw vibration systems are determined by modal parameters (modal frequencies, damping ratios and mode shape vectors), as well as the structural matrices of the vibration systems. So the whole identification of ...

The nonlinear two-degree-of-freedom system under consideration consists of the linear oscillator with a relatively big mass, which is an approximation of some continuous elastic system, and of the vibro-impact oscillator with a relatively small mass, which is an absorber of the linear system vibrations. Analysis of nonlinear normal vibration modes shows that a stable localized vibration mode, w...