Numerical modeling was carried out to investigate the responses of suction bucket foundations under vertical cyclic loading. Numerical results were compared with centrifuge experiment results. Before the capacity of the model suction bucket to resist cyclic loading could be investigated, the static pullout capacities had to be determined. The buckets with different aspect ratio are investigated...

experiments were carried out to observe the influence of loading type on concrete beam specimens. beam specimens made of similar concrete mixture with the same geometry were tested under three point static loading and low velocity drop weight impact loading. load – displacement behavior, absorbed energy dissipation capacity, stiffnesses, failure modes of beam specimens were obtained and discuss...

a parametric study is performed to assess the influence of the tension reinforcement index, ( ω = ρ fy /f bc), and the bending moment distribution (loading type) on the ultimate deformation characteristics of reinforced concrete (rc) beams. the analytical results for 15 simply supported beams with different amounts of tension reinforcement ratio under three different loading conditions are pres...

TiO2 nanoparticles about 20 nm in diameter in the form of anatase were prepared and characterized. The nanoparticles were successfully dispersed into a paraffin wax (PW) matrix without any surfactant. The differential scanning calorimetric instrument and the transient short hot-wire method were used to measure the thermal properties of the TiO2/PW composites. It is found that the phase-change t...

In this study, dynamic bearing capacity of adjacent shallow strip foundations located on sandy soil was examined using a numerical finite difference modeling, FLAC. The behavioral interference of shallow strip foundations under different conditions was investigated. The effect of soil strength parameters, geometric characteristics of shallow foundations and cyclic loads at different distance ra...