In complex task domains, such as games, students may exceed their teachers. Such tasks afford diverse means to tradeoff one type of performance for another, combining task elements in novel ways to yield method variations and strategy discoveries that, if mastered, might produce large or small leaps in performance. For the researcher interested in the development of extreme expertise in the wil...

glycerol is a promising feedstock for microbial cultivation and production of 1,3 propanediol (1,3 pdo). here we report a newly isolated bacterial strain ba11 from soil, capable of fermenting glycerol to 1,3 pdo, and has been identified to be a strain of klebsiella pneumoniae. strain ba11 was fast growing showing peak 1,3 pdo production in 6 h of cultivation with productivity of 1.2 g/l-h witho...

The slurry polymerization of ethylene was studied by employing a (TiCl4/Mg(OEt)2/TEA) catalyst system in hexane. The effects of triethylaluminum concentration and temperature on polymer yield and polymer viscosity average molecular weight, Mv, were investigated. The maximum polymer yield was obtained at an Al/Ti molar ratio of 124. The highest yield and Mv were achieved at 60 °C. The concentrat...

Both the continuous and batch transesterification of linseed oil were examined in order to maximize the fatty acid methyl esters (FAME) yield. The continuous process was conducted in a packed bed reactor using calcium oxide as a heterogeneous catalyst. In addition, the impact of two variables, namely the molar ratio of methanol to oil and the flow rate (ml/min), on the FAME yield were stu...

Canola oil was transesterified using a 1 : 1 molar mixture of methanol and ethanol (M/E) with potassium hydroxide (KOH) catalyst. The effects of catalyst concentration (0.5–1.5 wt-%), molar ratio of M/E to canola oil (3 : 1 to 20 : 1) and reaction temperature (25–75 7C) on the percentage yield measured after 2.5 and 5.0 min were optimized using a central composite design. A maximum percentage y...

Engkabang Fat Esters are produced from the alcoholysis reaction of oleyl alcohol and its fat using enzyme as biocatalyst. The work has been previously carried out mainly on the optimization of Engkabang Fat esters production in organic solvents. However, the effect of impeller speed-substrate molar ratio has yet to be discussed in detail. In the present paper, the influences of impeller speed a...

Stable commercial primary ammonium chlorides were combined with tertiary amines to initiate the controlled ring opening polymerisation of amino acid N-carboxyanhydrides to yield polypeptides with defined end group structure, predetermined molar mass and narrow molar mass distribution.

The purpose of this research work was to investigate the optimum operating conditions for biodiesel production from castor oil using a microwave. The Box–Behnken design of experiment was carried out using the Design Expert 7. A response surface methodology (RSM) was used to analyze the influence of the process variables (molar ratio of methanol to castor oil, catalyst concentration, reaction ti...

The ultrasound-assisted (UA) soybean oil methanolysis using KOH as a catalyst was studied at different reaction conditions in a microreactor. Box–Behnken experimental design, with three variables, was performed and the effects of three reaction variables i.e. reaction temperature, catalyst concentration and the methanol-to-oil molar ratio on fatty acid methyl ester (FAME) yield were evaluated b...