Experiments were performed to observe the fracture behavior of thin-wall and initially-flawed aluminum tubes to internal gaseous detonation loading. The pressure load, with speeds exceeding 2 km/s, can be characterized as a pressure peak (ranging from 2 to 6 MPa in these experiments) followed by an expansion wave. Flaws were machined as external axial surface notches. Cracks ran both in the ups...

The damage evolution and life prediction of cross-ply C/SiC ceramic-matrix composite (CMC) under cyclic-fatigue loading at room temperature and 800 °C in air have been investigated using damage parameters derived from fatigue hysteresis loops, i.e., fatigue hysteresis modulus and fatigue hysteresis loss energy. The experimental fatigue hysteresis modulus and fatigue hysteresis loss energy degra...

The stress distribution on the tip of the cracks and the stress intensity factor on them are the main courses in the fracture mechanic. The stress intensity factor of the cracks with the different load exited and the different geometry are listed in the tables of the standard books. In all of them, the cracks are located in the central point of the plates. In the uniform edge loaded case, the c...

numerical methods such as boundary element and finite element methods are widely used for the stress analysis in solid mechanics. this study presents boundary element method based on the displacement discontinuity formulation to solve general problems of interaction between hydraulic fracturing and discontinuities. the crack tip element and a higher order boundary displacement collocation techn...

In present work 2D FE (finite element) analysis of deformation and damage evolution site in fiber reinforced composites are carried out. The fiber cracking point and stresses is simulated in the fibers/matrix interface, using the ANSYS FE software at varying volume fractions. The effect of matrix cracks and the interface strength on the fiber failure is investigated. Multi-fibre model were used...

Transient mixed-mode elastodynamic crack growth along arbitrary smoothly varying paths is considered. Asymptotically, the crack tip stress field is square root singular with the angular variation of the singular term depending weakly on the instantaneous values of the crack tip speed and on the mode-I and mode-II stress intensity factors. However, for a material particle at a small distance awa...

In this paper, 2D boundary element stress analysis is carried out to obtain the T-stress for multiple internal edge cracks in thick-walled cylinders for a wide range of cylinder radius ratios and relative crack depth. The T-stress, together with the stress intensity factor K, provides amore reliable two-parameter prediction of fracture in linear elastic fracture mecha...