The price of rare-earth metals used in neodymium-iron-boron (NdFeB) permanent magnets (PMs) has fluctuated greatly recently. Replacing the NdFeB PMs with more abundant ferrite PMs will avoid the cost insecurity and insecurity of supply. Ferrite PMs have lower performance than NdFeB PMs and for similar performance more PM material has to be used, requiring more support structure. Flux concentrat...

BACKGROUND Magnetic fields may interfere with the function of cardiac pacemakers and implantable cardioverter-defibrillators (ICDs). Neodymium-iron-boron (NdFeB) magnets, which are small in size but produce strong magnetic fields, have become widely available in recent years. Therefore, NdFeB magnets may be associated with an emerging risk of device interference. OBJECTIVE We conducted a clin...

This paper proposes collision-free structure using NdFeB thin-film magnet for vibration energy harvesters. By using stripe shaped NdFeB magnet array on the Si MEMS structure, we finally obtained 3 mN of magnetic repulsive force on 8 × 8 mm specimen with 40 μm air-gap.

Laser welding has been considered as a promising method to join sintered NdFeB permanent magnets thanks to its high precision and productivity. However, the influences of laser welding on the magnetic property of NdFeB are still not clear. In the present paper, the effects of laser power on the remanence (Br) were experimentally investigated in laser spot welding of a NdFeB magnet (N48H). Resul...

A Halbach cylinder, fabricated from pre-magnetized sintered NdFeB magnet segments, is proposed for the powder aligning system during the compression or injection moulding of anisotropic bonded Halbach oriented NdFeB ring magnets. The influence of leading design parameters of the powder aligning system, viz. the number of magnet segments per pole, their axial length and radial thickness, and the...

This study presents the development of an in-plane rotary electromagnetic microgenerator, which consists mainly of a multilayer planar copper (Cu) microcoil and a multipolar hard magnet made of NdFeB, the whole volume of which is approximately 5 × 5 × 2 mm3. The study focuses on the design and manufacturing required to obtain a high power generation output, and an analytical model is developed ...

In this paper, NdFeB is used to design a new type of magnetic force actuator (MFA) with simple structure and high reliability. The permanent magnets are fixed on the static iron-core to generate a magnetic field, while the movable part locates within the magnetic field. It can drive the arc extinguishing unit powered by the Lorentz force, and this can be applied to the operation of the long-str...

A cryogenically cooled in-vacuum undulator was installed in the ID6 test beamline of the ESRF in January 2008. This 2 metre long hybrid undulator has a period of 18 mm. The magnetic assembly is based on NdFeB permanent magnets cooled at a temperature close to 150 K. A liquid nitrogen closed loop is used for the cooling of the undulator. This cooling system is well adapted to achieve a uniform t...

The integration of high performance RE-TM (NdFeB and SmCo) hard magnetic films into Micro-Electro-Mechanical-Systems (MEMS) requires their patterning at the micron scale. In this paper we report on the applicability of standard micro-fabrication steps (film deposition onto topographically patterned substrates, wet etching and planarization) to the patterning of 5 μm thick RE-TM films. While NdF...