this investigation was performed according to the widespread application of base metal alloys and few articles published about the marginal integrity of restorations fabricated by these metals.three standard dies of a maxillary first premolar were prepared with a flat shoulder finish line in buccal aspect and chamfer in palatal. one of them left with no change. on the buccal aspect of the secon...

The aims of this study were to investigate the retention force changes of different attachment systems after 10,000 insertion-separation cycles and the difference in retention force between precious and non-precious materials of the same attachment system. Four types of attachments (Ball, Rod, M3 stud, and AP-Piccolino), produced using both precious and non-precious metal alloys, were tested (n...

For past several years, precious alloys have been gradually replaced by non-precious ones in the dental casting field because of the rising price of dental alloys. In Japan during the past ten years, nickel-chromium alloys have been used extensively for crown or bridge and porcelain-fused-to-metal restorations instead of gold or silver alloys. This tendency seems to be the same all over the wor...

The aim of the study was to investigate the influence of dental alloys and their components on magnetic resonance imaging of the temporomandibular joint. A plaster and a water- filled acrylic resin phantom - representing the disc and the condyle of the TMJ - were used. Cylindrical crow-type samples of 13 alloys and 14 pure substances were investigated. All alloys were examined with regard to th...

The aim of this study was to develop an effective primer to improve the adhesive property between all kinds of dental metal alloy and resin cement. To this end, we synthesized N,N'-dimethacryloylcystine (NDMCC) which had both disulfide functional group (to improve adhesion between precious metal alloy and resin) and carboxyl group (to improve adhesion between non-precious metal alloy and resin)...

PURPOSE The influence of dental alloys on MRI of the temporomandibular joint was studied using a phantom model for this joint. METHODS At 1,5 T, 15 dental alloys and 14 of their most important components were investigated acquiring sagittal (FOV: 150 mm) and transverse (FOV: 250 mm) T1-weighted SE images. In 11 cases, T1- and T2*-weighted FLASH images were measured additionally. The artifacts...

Metals and metallic alloys are unavoidable materials in everyday dental use for the making of fillings, cast cores and post systems, individual crowns, implantants’ suprastructures, dentures and orthodontic devices. They still belong to the vital materials in dentistry. Applied alloys in a mouth are exposed to the influence of chemical, biological, mechanical, thermal and electrical forces whic...

PURPOSE The porcelain fused to gold has been widely used as a restoration both with the natural esthetics of the porcelain and durability and marginal fit of metal casting. However, recently, due to the continuous rise in the price of gold, an interest towards materials to replace gold alloy is getting higher. This study compared the bond strength of porcelain to millingable palladium-silver (P...

Five non-precious Ni-Co based alloys were analyzed with respect to their corrosion behaviour. The correlation between the amount of the elements Cr, Mo, V and the corrosion behaviour, expressed by the PREN (pitting resistance equivalent number) index in the case of the allied steels, was extended for Ni-Cr and Co-Cr dental alloys characterization. Open circuit potential, corrosion current densi...