In this research, residual strength and stress concentration factor of laminated composites with a circular open hole are studied analytically, numerically and experimentally. The numerical study was carried out using the finite element method. Moreover an analytical study was carried out with developing of point stress criterion. Mechanical testing was performed to determine the un-notched ten...

Mechanical testing of an advanced thermoplastic polyimide (LaRC-SI) with known variations in molecular weight was performed over a range of temperatures below the glass transition temperature. The physical characterization, elastic properties and notched tensile strength were all determined as a function of molecular weight and test temperature. It was shown that notched tensile strength is a ...

Anew set-up is proposed to perform high strain rate tension experiments on sheet metal using a compression Hopkinson bar system on the input side.With the help of a custommade load inversion device, the compression loading pulse is converted into tensile loading of the specimen boundary. A tensile output bar is used to measure the tensile force acting on the specimen boundaries. A high speed ca...

In this paper the capability of Gurson-Tvergaard-Needleman (GTN) model in the prediction of ductile damage in 7075-T651 aluminum alloy is investigated. For this purpose, three types of specimens were tested: Standard tensile bars, Round notched bar (RNB) specimens and compact tension (C(T)) specimens. Standard tensile bar tests were used to obtain the mechanical properties of the material and t...

Blends of nylon-6 with polybutadiene were prepared with comparable morphology and different molecular weights of the matrix. These specimens were tested using the notched Izod impact test and the notched tensile impact test. An increase in molecular weight resulted in a shift of the brittle-to-tough transition temperature of 40°C to lower temperatures. In the notched tensile impact tests, espec...

The aim of this study was to investigate in how far the way the specimen is fixed to the testing device influences the micro-tensile bond strength of adhesives to dentin. Compared to a flat jig, a notched jig enables the specimen to be aligned easier and more accurately perpendicular to the interface, thereby concentrating better the tensile stress at the actual interface. A notched jig yielded...

The heat treatments have been designed to vary the matrix microstructure in P/M processed SiC reinforced 7xxx Aluminum alloys to determine the effects of matrix microstructure, interface behavior on the mechanical properties. Smooth tensile, notched bend tests were performed. The results conclude that the clustered regions have been observed as preferred initiation sites in both tensile and not...