We report on the fabrication and electrochemical impedance characterization of a parallel plate capacitance sensor for ocean water salinity monitoring. The standard printed circuit board PCB fabricated and assembled sensor shows excellent response to changes in salinity with a sensitivity of 3.3 k /PSU. Use of the standard PCB process, necessitated by the requirement of low cost and ease of fab...

the possibility of using water insoluble fraction from biomass pyrolysis oil as additive in synthesis of wood-plastic novolac has been proved by using differential scanning calorimetry (dsc) and fourier transformed infra red (ft-ir) spectroscopy. synthesis of novolac with different concentrations (10, 20 and 30 wt %) of water insoluble fraction were performed. it was found that mechanical prope...

In this contribution, high ortho novolac resins modified with phenylboronic acid were synthesized. The thermal stability of novolac resins cured with hexamethylenetetramine (HMTA) and chemical states of B and N via a pyrolysis process were studied. For the cured o-novolac modified with phenylboronic acid, the temperature with maximum decomposition rate increased by 43.5 ̋C, and the char yield i...

The possibility of using water insoluble fraction from biomass pyrolysis oil as additive in synthesis of Wood-Plastic novolac has been proved by using Differential Scanning Calorimetry (DSC) and Fourier Transformed Infra Red (FT-IR) spectroscopy. Synthesis of novolac with different concentrations (10, 20 and 30 wt %) of water insoluble fraction were performed. It was found that mechanical p...

1,2,3‐Tris(4‐cyanatophenyl)propane, a new tricyanate ester monomer analogous to cyanated novolac or “phenolic triazine (PT) resin” that features more flexible chemical linkages at the central branch point, was synthesized in nine steps with an overall yield of 26%. The highly purified monomer exhibited an activation energy of 110 kJ/mol for auto‐catalytic cure at temperatures of 210 °C ...

nanocomposites based on phenolic resol and novolac resins and cloisite 30b were prepared. different kinds of phenolic resins and clay content were studied with respect to the morphology and mechanical properties of the polymer silicate layers. the phenolic resins, namely resol, novolac and their mixture and four different percentages of clay contents, 0.5, 1, 2 and 5 wt% have been considered. x...

In this work, separation performance of supported carbon membranes produced from Novolac Phenolic resin as the main precursor and carbon nanotubes as nanofiller were investigated for separation of CO2 from N2 and CH4. Supports were produced by carbonization of Novolac Phenolic resin-activated carbon mixture, and selective layer was coated by dip coating of prepa...

Pyrolysis-gas chromatography-mass spectrometry (MS) was used to identify the major organic products produced by pyrolysis of three foundry sand resins: (i) Novolac and (ii) phenolic urethane (PU) (both phenol-formaldehyde based resins) and (iii) furan (furfuryl alcohol based resin). These resins are used in the metal casting industry as a "sand binder" for making cores (used to produce cavities...

In this work, novolac resin with perfluorinated side chains was synthesized and cured with o-Cresol novolac epoxy resin to obtain epoxy resins with various fluorine contents. Attenuated total reflection Fourier transform infrared spectroscopy (ATR/FT-IR) was used to monitor the in situ water diffusion process in these systems. The diffusion coefficient of water first increased and then slightly...

In this work two types of lignin-novolac resins have been formulated, partially substituting phenol by softwood ammonium lignosulfonate as filler or extender (methylolated) to study the viability of that substitution when resins will be employed as adhesives in textile felts. A commercial novolac resin was used as reference. Free phenol, free formaldehyde, water content, softening point, and fl...