نتایج جستجو برای: oil refinery waste water
تعداد نتایج: 736882 فیلتر نتایج به سال:
Contamination of the water bodies occurs from different sources including oil refineries. Oil refinery effluent contains different chemicals at different concentrations including ammonia, sulphides, phenol, hydrocarbons and heavy metals. Monitoring the impact of pollutants on aquatic life forms is challenging due to the differential sensitivities of organisms to a given pollutant, and the inabi...
this research was done in order to determine the basic criteria for “tehran oil refinery effluemt treatmentunit” to prove the feasibility of the application of powdered activated carbon in aeration zone of activated sludge system. the main stages of this research included: determination of qualitative and quantitative characteristics of raw wastewater preparation of two pilot scale units of act...
Oil refinery waste activated sludge produced from oil wastewater biological treatment is a major industrial sludge. Two-phase anaerobic digestion of oil refinery waste activated sludge was studied for the first time. Thermal pretreatment under 170 °C is effective on sludge solubilization. At the optimum hydrolytic-acidogenic condition which was pH of 6.5, temperature of 55 °C and HRT of 2 days,...
This study was undertaken to evaluate a novel aerobic wastewater treatment model for the remediation of refinery effluents and to assess the removal efficiency of Bulkholderia cepacia strain AJI and Corynebacterium kutscheri strain AJ2 to clean oil waste from petrochemical company. Wastewater quality parameters including pH, BOD5, COD, TDS, OIL & GREASE, PHENOL concentration, TPH and THC were m...
This study was undertaken to evaluate a novel aerobic wastewater treatment model for the remediation of refinery effluents and to assess the removal efficiency of Bulkholderia cepacia strain AJI and Corynebacterium kutscheri strain AJ2 to clean oil waste from petrochemical company. Wastewater quality parameters including pH, BOD5, COD, TDS, OIL & GREASE, PHENOL concentration, TPH and THC were m...
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
The principal use of water by the petroleum refining industry in the United States of America is in the refining branch itself, and the present paper is concerned with problems arising from this use of water, and some of the measures being taken by the industry to solve these problems. The compilation oftheManualonDisposalof Refinery Wastes is briefly alludedto, and the importance ofrecirculati...
The physicochemical qualities of a refinery effluent and water and sediment of an effluent receiving water body were investigated. The treated refinery effluent contained very high concentrations of phenol (11.06 mg/l), oil and grease (7.52 mg/l), ammonia (8.52 mg/l), COD (91.76 mg/l), TDS (390.6 mg/l) and phosphate (6.2 mg/l), but low in sulphide, nickel, lead, copper and chromium, which were ...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید