نتایج جستجو برای: orthotropic plate
تعداد نتایج: 75287 فیلتر نتایج به سال:
The effect of fibre orientation on buckling behaviour in a rectangular composite laminate with central circular hole under uniform in-plane loading has been studied by using finite element method. The critical buckling loads with different fibre orientation in an orthotropic composite laminate (E-glass/epoxy) were obtained. The deformation behaviour of the plate is shown for modes, i=1,2. Studi...
This paper describes the design optimization of ferrocement-laminated plate made up of reinforcing steel wire mesh(es) and cement mortar. For the improvement of the designing process, the plate is modeled as a multi-layer medium, dividing the ferrocement plate into layers of mortar and ferrocement. The mortar layers are assumed to be isotropic in nature and the ferrocement layers are assumed to...
This paper is concerned with an investigation into the localized instability of a thin elastic orthotropic semi-infinite plate. In this study, a semi-infinite plate, simply supported on two edges and under different boundary conditions of clamped, hinged, sliding contact and free on the other edge, is studied. A mathematical model is used and a general solution is presented. The conditions unde...
This study presents exact bending solution of fully clamped orthotropic rectangular plates subjected to arbitrary loads resting on elastic foundations, based on the finite integral transform method. In this method, it is not necessary to determine the deformation function because the basic governing equations of the classical plate theory for orthotropic plates have been used. A detailed param...
This paper deals with the dynamic characterisation of plate structures elliptical orthotropic stiffness properties, using an equivalent thin theory a wave fitting approach. The method consists in projecting experimentally determined transverse displacement field on analytical Green’s function based Hankel’s functions. error between projected and measured fields is then minimized, varying charac...
In this paper, a continuum model based on the nonlocal elasticity theory is developed for vibration analysis of embedded orthotropic circular and elliptical micro/nano-plates. The nano-plate is bounded by a Pasternak foundation. Governing vibration equation of the nonlocal nano-plate is derived using Nonlocal Classical Plate Theory (NCPT). The weighted residual statement and the Galerkin method...
A theoretical study of the rigidities of slabs with circular voids oriented in the longitudinal and in the transverse direction is discussed. Equations are presented for predicting the bending and torsional rigidities of the voided slabs. This paper summarizes the results of an extensive literature search and initial review of the current methods of analyzing voided slab. The various methods of...
Novel method for a determination of residual stresses in orthotropic composite plates based on local displacement measurements by electronic speckle-pattern interferometry is developed and verified. The values of hole diameter increments in principal residual stress directions serves as initial experimental deformation. The technique is based on analytical solution of S.G. Lekhnitsky, which des...
A dynamic continuum plate model of a multi-story building is proposed in the form cantilevered orthotropic plate, developed framework Timoshenko’s theory plates, which describes seismic vibrations buildings. Formulas are given for determining reduced moduli elasticity, shear, and density building. Transverse natural forced oscillations nine-story under nine-point impacts considered. Numerical r...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید