In this study, the effects of hydrogen and hydroxygen additions and oxygen enrichment on the emission characteristics of a gasoline engine (EF7) were investigated and compared with each other. The simulation was launched by GT-Power at different engine speeds with 5 % to 15 % volume fractions for both of oxygen and hydrogen enrichment and 4.5 % to 9 % volume fractions of hydroxygen addition in ...

one of the methods to reduce the emissions in a diesel engine is by oxygen introduction into the combustion chamber which can be done by supplying the oxygen into the inlet manifold during suction stroke. oxygen affects different parameters such as brake thermal efficiency, fuel consumption, nox and smoke at different load conditions. load test was conducted for various concentrations of oxygen...

the main theme to conduct present research work was to evaluate the effect of anaerobic granular sludge in degradation of two azo dyes. the study was evaluated in batch experiments where anaerobic and aerobic conditions were integrated by exposing anaerobic granular sludge to oxygen. under these conditions, the azo dyes were reduced, resulting in a temporal accumulation of aromatic amines. subs...

Qualitatively, it is known that the reactants content within the catalyst layer (CL) is the driving moments for the kinetics of reaction within the CL. This paper aimed to quantitatively express the level of enhancement in electrical power due to enrichment in the oxygen content. For a given MEA, a flow field (FF) designer is always willing to design a FF to maximize the content of oxygen in al...

BACKGROUND When ascending to the high altitude, people living in low altitude areas will suffer from acute mountain sickness. The aim of this study is to test the hypothesis that whether an oxygen concentration membrane can be made and used to construct a new portable oxygen enrichment device for individuals in acute exposure to the high altitude. METHODS The membrane was fabricated using vin...

in the present study the adiabatic temperature of gaseous fuels were calculated and the influence of effective parameters of flame temperature was discussed. firstly, a new computational program named ftc (flame temperature calculations) was prepared to calculate the adiabatic flame temperature and then the effect of initial temperatures of combustion air and fuel, excess air content and oxygen...

In this study, a 3D combustion chamber was simulated using FLUENT 6.32. Aims to obtain accurate information about the profile of the combustion in the furnace and also check the effect of oxygen enrichment on the combustion process. Oxygen enrichment is an effective way to reduce combustion pollutant. The flow rate of air to fuel ratio is varied as 1.3, 3.2 and 5.1 and the oxygen enriched flow ...