نتایج جستجو برای: plasticizer molecular weight

تعداد نتایج: 928575  

Journal: :iranian journal of pharmaceutical research 0
s honary h orafai

the arithmetic mean roughness, ra, values were determined by scanning electron microscopic technique of different core models (furazolidone, nitrofurantoin and acetyl salicylic acid), coated by hpmc film forming solution containing 10 wt% of various molecular weight pegs. the results showed that both plasticizer molecular weight and core surface free energy could have a significant influence on...

H Orafai S Honary

The arithmetic mean roughness, Ra, values were determined by scanning electron microscopic technique of different core models (furazolidone, nitrofurantoin and acetyl salicylic acid), coated by HPMC film forming solution containing 10 wt% of various molecular weight PEGs. The results showed that both plasticizer molecular weight and core surface free energy could have a significant influence on...

H Orafai S Honary

The arithmetic mean roughness, Ra, values were determined by scanning electron microscopic technique of different core models (furazolidone, nitrofurantoin and acetyl salicylic acid), coated by HPMC film forming solution containing 10 wt% of various molecular weight PEGs. The results showed that both plasticizer molecular weight and core surface free energy could have a significant influence on...

ژورنال: مواد پرانرژی 2018
, ,

Plasticizers are small molecules with low molecular weight. These compounds typically have an esteric structure. The plasticizers reduce the glass transition temperature and the viscosity of the polymer to enhance the flexibility and processability of polymer materials. The main problem with these additives is that, over time, they migrate from the polymeric matrix and exude to the surface of p...

ژورنال: مواد پرانرژی 2016

In this work, nitration of low molecular weight polybutadiene (PB) by a convenient and inexpensive procedure has been investigated. The product (Nitropolybutadiene (NPB) energetic plasticizer) was characterized by FT-IR, 1H-NMR, GPC, TGA, DSC etc. Then NPB energetic polymer plasticizer and nitro-hydroxyl terminated polybutadiene (NHTPB) binder have been replaced with dioctyladiphate (DOA) inert...

Journal: :Materiale Plastice 2021

In this study, two different non-ionic surfactants have been evaluated as a plasticizer in lithium polymer electrolytes and compared with an organic carbonate-based plasticizer. To that end, molecular weight structure selected (Triton� X-100 Brij�L23) carbonates (EC:DEC1:1) plasticizers electrolytes. The effect of the content, salt content surfactant characteristics on properties such ionic con...

ژورنال: مواد پرانرژی 2016

Use of energetic plasticizer, N-Butyl-N-(2-Nitroxyethyl) Nitramine (BuNENA), in the propellants’ formulations, has some advantages such as not migration in the fuel, high thermal stability, low sensitivity of the propellant formulation, improvement in mechanical properties and raising the impulse due to light molecular weight of combustion gases. In this study two acidic ionic liquids ([(...

Journal: :Dental materials journal 1989
N Katakura M Hosotani K Iijima H Honma M Sakaguchi

The viscoelastic properties of new experimental tissue conditioners which consist of synthesized poly (butyl methacrylate) PBMA and a liquid of aromatic-ester plasticizer, without alcohol, were investigated to evaluate the effects of the molecular weight of polymer. The master curves of storage modulus G', dynamic viscosity eta' and loss tangent tan delta were constructed from the viscoelastic ...

2002
HENK VERHOOGT BRUCE A. RAMSAY JULIANA A. RAMSAY

The influence of thermal history on the properties of commercial P(3HB-co-l2%-3HV) was studied. Thermogravimetric analysis and differential scanning calorimetry revealed that the plasticizer evaporated at 140°C or higher. The loss of plasticizer during thermal treatment at 170 and 180°C resulted in a slight increase of the melting temperature of the polymer. The processing time and temperature,...

2013
Khaoula Khwaldia

Hydroxypropyl methylcellulose (HPMC)–coated papers without plasticizer and plasticized with polyols were prepared, and the effects of coating weight, different plasticizers (glycerol (GLY), sorbitol (SOR), and polyethylene glycol (PEG)), and plasticizer contents (20% to 50%) on the physical and mechanical properties of the resulting biopolymer-coated papers were studied. Coating weight was the ...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید