Increasing demand on mass production of high precision parts, has pushed the precision manufacturing industry to develop relatively low cost, reliable precision finishing processes to meet market requirements. A gap within the provision of low cost polishing processes has been identified; namely parts with a radius of curvature less than 10mm will be increasingly present in new mass produced pr...

a rahalt-chromium (Co-Cr) alloy using a centrifugal shooting type polishing machine. In tha present work, we examined the effects of the texture of polishing particle and polishing time on the surface roughness of Co-Cr alloy cast specimens. Nine differcnt textures of polishing par'ticle were investigated wiLh respect to core material and paTticle abrasiveness: three (lifferent elastic body cer...

This paper presents the development of low cost Nano membrane fabrication system. The system is specially designed for anodic aluminum oxide membrane. This system is capable to perform the processes such as anodization and electro-polishing. The designed machine was successfully tested for ‘mild anodization’ (MA) for 48 hours and ‘hard anodization’ (HA) for 3 hours at constant 0C. The system is...

The finishing process of advanced ceramic balls can be divided into two steps. The first step is lapping in which most of the stock from the ball is removed at a higher material removal rate. The second step is polishing in which the required ball surface roughness, roundness, dimensional and geometric accuracy are achieved. In polishing, the abrasive particle size is ≤ 1 μm, and the load and s...

This paper applied the Taguchi approach to investigate the effects of polishing parameters to obtain the optimal processing conditions for CoCr alloy polishing using a multiaxis CNC controlled corrective polishing machine. The polishing medium used was 1m diamond paste with a Microcloth(polishing cloth). Surface finish parameter Sa was chosen as the criterion for process optimization. The exper...

The future X-ray observatory missions require grazing-incidence x-ray optics with angular resolution of < 5 arcsec halfpower diameter. The achievable resolution depends ultimately on the quality of polished mandrels from which the shells are replicated. With an aim to fabricate better shells, and reduce the cost/time of mandrel production, a computercontrolled polishing machine is developed for...

This paper applied the Taguchi approach to investigate the effects of polishing parameters to obtain the optimal processing conditions for CoCr alloy polishing using a multiaxis CNC controlled corrective polishing machine. The polishing medium used was 1m diamond paste with a Microcloth(polishing cloth). Surface finish parameter Sa was chosen as the criterion for process optimization. The exper...