In this investigation, rheological properties of three different polymer-modified bitumen compounds containing recycled polyethylene terephthalate (R-PET), crumb rubber (CR) and poly (styrene-butadiene-styrene) (SBS) are evaluated and compared. The modified samples were tested by a dynamic shear rheometer (DSR) where complex modulus (G*), phase angle (δ) and rutting resistance (G*/Sinδ) of spec...

Nanoclays are new generation of processed clays of interest in a wide range of high performance composites. In other words, nanoclay is defined as a clay that can be modified to make the clay complexes compatible with organic monomers and polymers. Here, it can be said that the polymeric nanocomposites are among the most exciting and promising classes of materials discovered recently. A number ...

the polymeric and non-polymeric petrochemical wastes are environmentally unfavorable materials. we have to found a way to reuse these wastes in a safe manner. in styrene-butadiene rubber (sbr) production plant two major wastes are produced one is a fine rubber powder and the other is recycled n-methyl pyrrolidone (nmp). in high-density polyethylene (hdpe) production plant also a low molecular w...

Polymer-modified bitumen is used to combat different pavement distresses and to increase the life span of pavement. Unmodified bitumen cannot perform better with the range extreme minimum and maximum pavement temperatures. The polymers commonly used to modify the bitumen are ethylene vinyl acetate (EVA) styrene butadiene styrene (SBS). The aim this study to compare the performance of EVA modifi...

This study is carried out to explore the effect of nano materials (SiO2 & TiO2) on the physical and rheological properties of Bitumen. To achieve this goal, Nano materials are blended in bitumen in various percentages (0.3, 0.6, 0.9 and 1.2%). The physical and rheological properties of modified binders are characterized using a penetration, softening point, kinematic viscosity and a dynamic...

the neat bitumen, an oil refining by-product, has its own inherent weakness under long-time loading at low and high temperatures. these performance limitations of neat bitumen have led researchers to modify its physical andmechanical properties. according to several studies, polymers can be used to modify the properties of bitumen. due to much lower production costs and aiming to reduce environ...

One of the important factors of cracks on the asphalt pavements is bitumen aging that associated with the loss of volatile components and oxidation of asphalt binder. This paper is about effect of Styrene-Butadiene-Styrene (SBS) polymer on asphalt aging In order to decrease asphalt aging effects. For this purpose samples of base bitumen and SBS modified bitumen aged according to the rolling thi...

Layered double hydroxides (LDHs) are an ultraviolet-light (UV) resistant material. In this study, LDHs were used to modify bitumen. The optical and UV aging properties of LDHs modified bitumen were investigated. Firstly, the thin films of bitumen, with and without LDHs, were prepared. By using the UV-Vis spectrophotometer, absorbance, reflectance, and transmittance of bituminous thin film were ...

Abstract—In order to use bitumen in hot mix asphalt, it must have specific characteristics. There are some methods to reach these properties. Using polymer modifiers are one of the methods to modify the bitumen properties. In this paper the effect of StyreneButadiene-Rubber that is one of the bitumen polymer modifiers on rheology properties of bitumen is studied. In this regard, the rheological...

SBS (styrene-butadiene-styrene block copolymer) modified bitumen is one of most widely used polymer modified bitumens in China. It is also not satisfactory when subjected to extreme conditions. Multiple-walled carbon nanotubes, as a type of advanced nanomaterial, are investigated extensively because of their strong adsorption capacity. Little research has been done about MWCNTs/SBS modified bit...