Two sets of opaque water-based acrylic coatings were prepared with IR-reflective pigments and conventional pigments. The objective of this work was to determine the efficiency of IR-reflective pigments in limiting the heat buildup of opaque coating formulations. Experiments performed on PVC substrates revealed that IR-reflective pigments significantly decreased the temperature increase above ro...

Optical beam deflection systems are widely used in cantilever based atomic force microscopy (AFM). Most commercial cantilevers have a reflective metal coating on the detector side to increase the reflectivity in order to achieve a high signal on the photodiode. Although the reflective coating is usually much thinner than the cantilever, it can still significantly contribute to the damping of th...

Sol–gel spin coating process is used to produce optical filters from SiO2 and TiO2 multilayers. By coating the films symmetrically on both sides of the glass substrates, we designed two types of three-layer anti-reflective (AR) filters for the near–infrared region, and a ninelayer reflective filter for the near–UV region. We develop a simple theoretical model for these filters, which incorporat...

We tested the ability of an ultraviolet C (UV-C)-reflective wall coating to reduce the time necessary to decontaminate a room using a UV-C-emitting device (Tru-D SmartUVC). The reflective wall coating provided the following time reductions for decontamination: for methicillin-resistant Staphylococcus aureus, from 25 minutes 13 seconds to 5 minutes 3 seconds ([Formula: see text]), and for Clostr...

Results:  UV-C Technology effectively reduces environmental contamination and should be considered when environmental transmission is significant.  The Optimum UV TM device achieved an overall 3.56-log10 reduction for MRSA in 5 minutes and an overall 2.78-log10 reduction for C. difficile spores in 10 minutes in typical patient rooms (not treated with UV reflective wall coating).  When the pa...

the effect of single and double-layer anti-reflective coatings on efficiency enhancement of silicon solar cells was investigated. the reflectance of different anti-reflection structures were calculated using the transfer matrix method and then to predict the performance of solar cells coated by these structures, the weighted average reflectance curves were used as an input of a pc1d simulation....

Today’s coating processes provide the capability to produce anti-reflective (AR) coatings, bandpass filters, separation filters, high laser damage threshold coatings, mirror coatings, etc. with high precision and high yields. The production environment is based on batch-coating processes and component sizes that range from mm to meter. Generally, one function such as limited wavelength coverage...

Although, that the solar energy is important for life continuity, there is need to protect large buildings from these radiations in summer and if the buildings are permitted to take these radiations, the cost of cooling will be too much. One of the most effective methods used to solve this problem is to coat buildings with specific pigments that reflect the solar infrared radiation. This wo...

The effect of single and double-layer anti-reflective coatings on efficiency enhancement of silicon solar cells was investigated. The reflectance of different anti-reflection structures were calculated using the transfer matrix method and then to predict the performance of solar cells coated by these structures, the weighted average reflectance curves were used as an input of a PC1D simulation....

The fully-leaky guided wave technique has been used to study the reflective 90 ̊ MTN liquid crystal cell used for LCOS. The cell is comprised of upper substrate with indium-tin-oxide coating and lower substrate with aluminum coating. Reflective angle-dependent signals (Rss, Rpp, Rsp and Rps) were recorded over a range of angles of incidence with the cell under application of 0 7 Vrms ac electric...