most of the methods that have been proposed for speed estimation of induction machines require the rotor and the stator resistance to change in the normal operating range. on the other hand, estimation of the rotor resistance requires rotor speed. in this paper, after studying conditions for simultaneous estimation of rotor speed and rotor resistance, a method for simultaneous estimation of rot...

in this research work with the aid of tagouchi experimental design and rawing of interaction curves with minitab software, the best rotor speed and dump temperature of mixing for physico-mechanical and rheological properties of the rubber compound with three mixing steps was obtained. moreover by plotting the mean curves in excel worksheet, the dependency of properties on rotor speed, dump temp...

the rotor of enegelberg whitener was equipped with a screw conveyor to reduce broken rice percentage. according to preliminary experiments this modification could reduce broken rice percentage about 2.5%. further experiment was performed to determine the effect of rotor speeds and blade positions on white rice quality. to do this, five rotor speeds, consisting 500, 600, 700, 800 and 900 r.p.m a...

in this research paper, the performance of an air-cored axial flux permanent magnet synchronous generator is evaluated for low speed, direct drive applications using 3d finite element modeling and experimental tests. the structure of the considered machine consists of double rotor and coreless stator, which results in the absence of core losses, reduction of stator weight and elimination of cog...

In this paper, two kinds of vibrations are considered for a composite Timoshenko rotor: longitudinal-torsional vibration and two plane transverse one. The kinetic and potential energies and virtual work due to the gyroscopic effects are calculated and the set of six governing equations and boundary conditions are derived using Hamilton principle. Differential quadrature method (DQM) is used as ...

This paper analyzes an induction motor with high temperature superconducter (HTS) coated slotted solid rotor. By slotting the solid rotor, the electromagnetic torque near synchronous speed will increase but the starting torque will decrease. To improve starting torque, rotor slots are coated with HTS materials. Using HTS material vary the rotor resistance to great extends in starting step and t...

induction motors are the most commonly used in the traction industries and electric vehicles, due to their low primary cost, low maintenance costs, and good performance. speed identification is needed for the induction motor drives. however, using of speed sensors in the induction motor drives is associated with problems such as, extra cost, reduced reliability, added mounting space, etc.. ther...

This paper suggests novel sensorless speed estimation for an induction motor (IM) based on a stator current model reference adaptive system (IS-MRAS) scheme. The IS-MRAS scheme uses the error between the reference and estimated stator current vectors and the rotor speed. Observing rotor flux and the speed estimating using the conventional MRAS technique is confronted with certain problems relat...

determination of the starter torque-speed diagram is a major task in the design or selection of a proper gas turbine starter. in this paper, the maximum power of the mgt-40 gas turbine starter was calculated based on the dynamics of the rotor, start-up logic, and compressor map. in a recent research, the pressure ratio was assumed as a linear function of the rotor speed and the required starter...

Gaussian processes prior model methods for data analysis are applied to wind turbine time series data to identify both rotor speed and rotor acceleration from a poor measurement of rotor speed. In so doing, two issues are addressed. Firstly, the rotor speed is extracted from a combined rotor speed and generator speed measurement. A novel adaptation of Gaussian process regression based on two in...