Experiments are conducted in a shock tube to study the shock loading of a cylinder and a cylinder bank. The experiments model the loading of the cooling tubes in an inertial confinement fusion reactor where banks of tubes line the reaction chamber. The diffraction of the shock wave is visualized using shadowgraphy. Shock loading of the cylinder(s) is measured with flush mounted piezoelectric pr...

We present an experimental study of the motion of a viscoelastic micellar fluid around a moving cylinder, which ranges from fluidlike flow to solidlike tearing and fracture, depending on the cylinder radius and velocity. The observation of crack propagation driven by the cylinder indicates an extremely low tear strength, approximately equal to the steady state surface tension of the fluid. At t...

Vortex formation from a horizontal cylinder coincident with a free surface of a shallow water flow having a depth of 25.4 mm was experimentally investigated using the particle image velocimetry technique. Instantaneous and time-averaged flow patterns in the wake region of the cylinder were examined for three different cylinder diameter values under the fully developed turbulent boundary layer c...

Aim: To assess the suitability, sensitivity and specificity of F gene based RT-PCR for detection of PPRV infection in India. Materials and Methods: A total of 26 blood samples collected from 26 animals suspected for Peste des petits ruminant (PPR) were tested by RTPCR using F1/F2 primers set and then compared with sandwich-ELISA for detection of PPR virus. Results: Out of 26 samples tested RT-P...

The immunoglobulin superfamily member CD147 is a widely expressed glycoprotein that occurs in both a membrane‑spanning and soluble form. Sandwich ELISA is a powerful tool for analyzing soluble antigens. The aim of the present study was to obtain a highly specific polyclonal antibody against human CD147 that can be used for sandwich ELISA analysis. Expression of recombinant CD147 by a eukaryotic...

In this paper deflection and free vibration of sandwich panel is studied. The core of Sandwich panels is made of hexagonal honeycomb and faces are made of two different materials of Carbon Fiber Reinforced Plastic and K-aryl/epoxy covering. The governing equations are deduced from the First order Sheer Deformation Theory (FSDT) and they are solved using Generalized Differential Quadrature Metho...

We consider the effective motion along a cylinder of a particle that freely diffuses in the bulk and intermittently binds to the cylinder. From an exact approach we derive the different regimes of the effective motion along the cylinder characterized by physical rates for binding/unbinding and the bulk diffusivity. We obtain a transient regime of superdiffusion and, interestingly, a saturation ...

6 In this paper, theoretical study is carried out to investigate the general 3D short-crested 7 wave interaction with a concentric two-cylinder system. The interior cylinder is imperme8 able and the exterior cylinder is thin in thickness and porous to protect the interior cylinder. 9 Both cylinders are surface-piercing and bottom mounted. Analytical solution is derived 10 based on the linear po...

Sandwich composite are used in numerous structural applications, with demonstrated weight savings over conventional metals and solid composite materials. The increasing use of sandwich composites in defense structures, particularly those which may be exposed to shock loading, demands for a thorough understanding of their response to suc highly transient loadings. In order to fully utilize their...

This work examines the performance of composite panels when subjected to underwater impulsive loads. The scaled fluid–structure experimental methodology developed by Espinosa and co-workers was employed. Failure modes, damage mechanisms and their distributions were identified and quantified for composite monolithic and sandwich panels subjected to typical blast loadings. The temporal evolutions...