a one dimensional dynamic model for a riser reactor in a fluidized bed catalytic cracking unit (fccu) for gasoil feed has been developed in two distinct conditions, one for industrial fccu and another for fccu using various frequencies of microwave energy spaced at the height of the riser reactor (fccu-mw). in addition, in order to increase the accuracy of component and bulk diffusion, instanta...

run-out-table (rot) is located between last finishing stand and down coiler in a hot strip mill. as the hot steel strip passes from rot, water jets impact on it from top and bottom and strip temperature decreases approximately from 800-950 °c to 500-750°c. the temperature history that strip experience while passing through rot affects significantly the metallurgical and mechanical properties, s...

power transformers are important equipments in power systems. thus there is a large number of researches devoted of power transformers. however, there is still a demand for future investigations, especially in the field of diagnosis of transformer failures. in order to fulfill the demand, the first part reports a study case in which four main types of failures on the active part are investigate...

in this thesis a calibration transfer method is used to achieve bilinearity for augmented first order kinetic data. first, the proposed method is investigated using simulated data and next the concept is applied to experimental data. the experimental data consists of spectroscopic monitoring of the first order degradation reaction of carbaryl. this component is used for control of pests in frui...

a semi-empirical mathematical model for predicting physical part of ignition delay period in the combustion of direct - injection diesel engines with swirl is developed . this model based on a single droplet evaporation model . the governing equations , namely , equations of droplet motion , heat and mass transfer were solved simultaneously using a rung-kutta step by step unmerical method . the...

saluk mount is selected for devonian biostratigraphy. this area located at southwest of bojnurd. in this study three sections are selected and two sections, chahar-borj and tabar sections with a thickness of 650 m, which consist mainly of calcareous sediments was studied in detailed but third section, qelli section, with a thickness of about 450m which consist mainly of sandstone and evaporates...

flow in natural river bends is a complex and turbulent phenomenon which affects the scour and sedimentations and causes an irregular bed topography on the bed. for the reason, the flow hydralics and the parameters which affect the flow to be studied and understand. in this study the effect of bed and wall roughness using the software fluent discussed in a sharp 90-degree flume bend with 40.3cm ...

sange siyah dam is located two kilometers down the kabod khani village. the environ of ghorrve city in kurdestan province. this is an clay core dam. in this dam instrumentation is performed in three section and consist of electrical piezometers, total pressure cells, settlement cells and so on. the main objective of instrumentation is to control the behavior of dam body and foundation, end else...

any change in the refractive index of a laser active medium can lead to serious degradation of beam quality, laser beam modes, laser performance and variation in the intensity distribution. alteration in the refractive index of laser active medium is especially notable in high power lasers. it is clear that in the laser beam production, the pumping agent induces a great amount of heat which...

a simple, sensitive and selective method for solvent extraction and spectrophotemetric determination of lanthanum (ii) europium (iii), and cerium (iii) is described , the rare earth metals are extracted into chloroform solution of n-phenylbenzohydroxamic acid (pbha) at ph 9-10 various parameters are studied to optimize the extraction conditions. the molar absorptivity is found to increase from ...