It is known that the seismic response of a structural system is highly influenced, in addition to the earthquake input, by the dynamic characteristics of the system itself. This paper presents an approach for the identification of the characteristics of the structural system resisting to horizontal loads which enables to satisfy given seismic performance objectives. This is achieved by consider...

Buckling-Restrained Braced Frame system(BRBFs) are a new type of steel seismic-load-resisting system that has found use in several countries because of its efficiency and its promise of seismic performance far superior to that of conventional braced frames. The system is addressed in the 2005 edition of the AISC Seismic Provisions for Structural Steel Buildings, also a set of design provisions ...

Moment resisting frames as one of the conventional lateral load resisting systems in buildings suffer from some limitations including code limitations on minimum span-to-depth ratio to ensure the formation of plastic hinges with adequate length at beam ends. According to seismic codes, in ordinary steel moment resisting frames the minimum span-to-depth ratios should be limited to 5 and in speci...

Composite RCS building frames integrate reinforced concrete columns with structural steel beams to provide an efficient solution for the design and construction of earthquake-resisting structures. In this paper, an optimization framework is developed for performance-based seismic design of planar RCS moment resisting frames. The objective functions are defined as minimizing the construction cos...

in the aftermath of the 1994 northridge, california, earthquake. a significant number of steel moment resisting structural systems were damaged. many studies and researches have been conducted to improve the seismic performance of structures after the catastrophe. one of the proposed connections for special moment-resisting frames included aisc-358 is kaiser bolted bracket moment connection, br...

Following the Northridge earthquake of 1994, a significant number of steel moment resisting structural systems were damaged. Several studies have been conducted to improve the seismic performance of steel structures and specially their beam-to-column connections. One of the proposed connections for special moment-resisting frames included AISC-358 is Kaiser bolted bracket moment connection, bri...

The seismic performance of elliptic braced moment resisting frame (ELBRF) is assessed here and is found that the structural behavior is improved and is of free of architectural space. The demand for seismic performance of ELBRF is estimated through conventional pushover methods of 3, 5, 7, and 10-story ELBRF frames and they are compared with special moment resisting frames (SMRF) and X-Braced C...

the present article seek to investigate the function of elliptical steel damper function in steel frames seismic resisting. the elliptical damper is a kind of earthquake energy dissipater in structure which acts based on the steel yielding feature. thus, this damper in frame lateral displacement mechanism is expected to have a satisfying hysteretic behavior in terms of energy absorption is on a...

Modular systems have been mostly researched in relatively low-rise structures but, lately, their applications to mid- to high-rise structures began to be reviewed, and research interest in new modularization subjects has increased. The application of modular systems to mid- to high-rise structures requires the structural stability of the frame and connections that consist of units, and the eval...

Conventional design of steel plate shear walls SPSWs assumes that 100% of the story shear is resisted by each infill panel. Following this approach, strength provided by the boundary frame moment resisting action, which provides the SPSW with overstrength, is neglected. While this design assumption has a positive impact on seismic performance of SPSWs, no analytical work has been done to quanti...