secondary flow investigation could be regarded as an important issue in open channel flow, in spite of its lower quantity compared to the base flow in the water course. it should be given special consideration because of the influence on some hydraulic factors in open channel, specifically in compound channels. in compound channels' due to the difference in the flow velocity of the main ch...

the production of shear flow profile in a wind tunnel test-section with the aid of in-plain horizontal wire-grids is explained. the design procedure with experimental results are given. it is concluded that the deepest shear, produced by this procedure, cannot have a slope of more than 1.777. it is shown that the stagnation streamlines in a shear flow will be displaced due to the existence of s...

the effect of weak shear thickening and shear thinning on the stability of the taylor-couette flow is explored for a carreau-bird fluid in the narrow-gap limit. the galerkin projection method is used to derive a low-order dynamical system from the conservation of mass and momentum equations. in comparison with the newtonian system, the present equations include additional nonlinear coupling in ...

following recent works of several authors like huilgol, bhattacharya etd. and javadpour et al., this paper is to contribute further to the literature of axial flow in a rotational coaxial rheometer. we consider axial flow of herschel bulkley mode1 between two concentric cylinders with the inner one rotating, while the outer cylinder is held stationary. an attempt has been made to direct the ana...

a mathematical analysis has been carried out for the axial flow of a bingham plastic fluid, in the concentric cylinder viscometer which consists of a cylindrical sample holder (the cup) and a cylindrical spindle (the bob) coaxial with the cup. the fluid to be tested flows through the annular gap of the cup and the bob system, sheared by the rotation of the inner cylinder, while the outer cylind...

pavement permanent deformations due to lack of shear strength in mixture are a major reason of rutting. any simple test to determine mixtures resistance to permanent deformation isn’t distinguished in the 1st level of superpave mix design method and prevalent methods for evaluating mixture rut resistance are expensive and time-consuming. two aggregate types, gradations, asphalt cements and fill...

A mathematical analysis has been carried out for the axial flow of a Bingham plastic fluid, in the Concentric Cylinder Viscometer which consists of a cylindrical sample holder (the cup) and a cylindrical spindle (the bob) coaxial with the cup. The fluid to be tested flows through the annular gap of the cup and the bob system, sheared by the rotation of the inner cylinder, while the outer cy...

Turbidity currents in the ocean and lakes are driven by suspended sediment. The vertical profiles of velocity and excess density are shaped by interaction between the current and bed as well as between the current and the ambient water. This paper presents 48 series of experiments in which saline gravity currents flow through a laboratory sinuous flume. flume contains three successive bends wit...

The analytical treatment of nonlinear evolution of the shear-flow-modified current driven ion cyclotron instability and shear-flow-driven ion cyclotron kinetic instabilities of magnetic field–aligned plasma shear flow is presented. Analysis is performed on the base of the nonlinear dispersion equation, which accounts for a new combined effect of plasma turbulence and shear flow. It consists in ...

The objective of the present study is to systematically elucidate the time-dependent rheological behavior of concentrated xanthan gum solutions in a wide variety of shear flow conditions. In order to analyze the time-dependent behavior, start-up, interrupted shear flow, step shear flow and cyclic shear flow experiments have been conducted in this work.