9 The effect of mixer shear strain rate on the performance of a model 10 micro-crystalline cellulose pharmaceutical paste undergoing extru11 sion–spheronisation was studied using a laboratory scale planetary 12 mixer and a screw-based mixer. The maximum shear strain rate in 13 each mixer was estimated. Five pastes were prepared, one each at 14 97 and 265 s−1 in the planetary mixer, and one each...

A constitutive model of bulk metallic glass (BMG) plasticity is developed which accounts for finitedeformation kinematics, the kinetics of free volume, strain hardening, thermal softening, rate-dependency and non-Newtonian viscosity. The model has been validated against uniaxial compression test data; and against plate bending experiments. The model captures accurately salient aspects of the ma...

General thermo-mechanical behavior of composites reinforced by shape memory alloy fibers is predicted using a three-dimensional analytical micromechanical method to consider the effect of fibers activation. Composite due to the micromechanical method can be exposed to general normal and shear mechanical and thermal loading which cause to activate the shape memory alloy fibers within polymeric m...

Loading a specimen as shown in Figure 1a produces shear stresses in the material. An initially square element of the material, having vertical sides parallel to the direction of loading, is distorted by these stresses into a diamond shape as illustrated in Figure 1b, where the distortion is greatly exaggerated for pictorial clarity. Shear strain is defined as the magnitude of the change in the ...

Three-dimensional model binary glasses produced by quenching from a range of liquid temperatures were tested in shear over a range of strain rates using molecular-dynamics techniques. Tests were performed under constant volume and constant pressure constraints. The simulations revealed a systematic change in short-range order as a function of the thermal and strain history of the glass. While s...

In this paper, a discontinuity in beams whose intensity is adjusted by the spring stiffness factor is modeled using a torsional spring. Adapting two analyses in strong and weak forms for discontinuous beams, the improved governing differential equations and the modified stiffness matrix are derived respectively. In the strong form, two different solution methods have been presented to make an a...

In this paper, a discontinuity in beams whose intensity is adjusted by the spring stiffness factor is modeled using a torsional spring. Adapting two analyses in strong and weak forms for discontinuous beams, the improved governing differential equations and the modified stiffness matrix are derived respectively. In the strong form, two different solution methods have been presented to make an a...

This paper proposes a framework for the constitutive model based on the semi-micromechanical aspects of plasticity, including damage progress for simulating behavior of concrete under multiaxial loading. This model is aimed to be used in plastic and fracture analysis of both regular and reinforced concrete structures, for the framework of sample plane crack approach. This model uses multilamina...

The potential for structural failure of consolidated clay materials, which is of great importance in many applications, typically are assessed by measuring the localized strain bands that develop under anisotropic load stress. Most methods are precluded from providing a full understanding of the strain anisotropy because they only give two-dimensional information about the stressed clay blocks....

In this study, two-dimensional finite element modeling was used to study the simultaneous effect of the cell shape and regular cell distribution on the anisotropy of the elastic properties of 316L stainless steel foam. In this way, the uniaxial compressive stress-strain curve was predicted using a geometric model and fully solid 316L stainless steel. The results showed that the elastic tangent ...