A low cross-polarization slot array antenna in the narrow wall of ridge waveguide is presented. A non-angled slot which is created in the narrow wall of the ridge waveguide is considered to be used as radiating resonant slot. The normalized resistance and normalized reactance curves are presented for design purposes. A six element slot array waveguide antenna with ridges on its narrow wall is t...

in this article, the linear array (with 20 elements in the horizontal orientation) of microstrip antenna is examined with horizontal polarization. the set includes three microstrip substrates. there is a power network in two lower substrates and microstrip patches in the upper substrate. excitation of patches has been done as coupled through the power network in two lower substrates. using the ...

A uniformly spaced comb taper slot antenna array is proposed for directional ultra-wideband (UWB) applications. The UWB array consists of four identical comb taper slot antennas, a mutistage with four-way microstrip UWB power divider, and four identical coaxial cable lines. A maximum gain of 15.5dBi within the band is obtained when the element separation is properly selected. The uniform spacin...

This paper presents the design, simulation, and measurement of two low-cost broadband circularly polarized (CP) printed antennas: a single element and an array at C band. The proposed single element antenna is excited by an L-shaped strip with a tapered end, located along the circular-slot diagonal line in the back plane. From the array experimental results, the 3 dB axial ratio bandwidth can r...

Yong-Woong Jang 33 A numerical simulation and an experimental implementation of T-shaped microstrip-fed printed slot array antenna are presented in this paper. The proposed antenna with relative permittivity 4.3 and thickness 1.0mm is analyzed by the finite-difference time-domain (FDTD) method. The dependence of design parameters on the bandwidth characteristics is investigated. The measured ba...

In this paper, the authors propose a circularly polarized printed antenna combining a slot array antenna and a patch antenna, with dual-band operation. The proposed antenna has good isolation performance, is compact, and has simple configuration. This antenna is composed of two parts, a patch antenna (for Rx) on the top, and a slot array antenna (for Tx) on the bottom, respectively. The element...

A compact two-layer slot array antenna at 24GHz based on substrate integrated waveguide (SIW) technology is presented. The feed waveguide is placed underneath the slot array and is coupled through slanted slots to branches of the array leading to considerable reduction in size compared to onelayer SIW slot array antennas that are fed from one end. Fullwave electromagnetic simulations show excel...

This paper presents the radiation characteristics of a circularly polarized conical beam spherical slot array antenna for applying to the mobile satellite communication subscriber. The structure of the antenna is easy to fabricate i.e., a ring of perpendicular slot pairs cut on an outer surface of a concentric conducting spherical cavity enclosed by the conducting conical surface with the simpl...

The design and test of microstrip slot antenna array for 3D microwave imaging for the structural assessment of concrete structure is presented in this paper. The array contains 16 antenna elements and uses microstrip feed network for the ease in the design. It also adopts commercially available PIN diodes as switches to control the sequence of turning on or off microstrip slot antenna elements....