ethylene was polymerized in slurry phase over a ticl4/mg(oc2h5)2 catalyst activated by al(c2h5)3. it was shown experimentally that mass transfer resistance has no effect on polymerization kinetics. after estimation ofthe active site concentration by inhibition method with carbon monoxide, the effects of polymerization temperature, monomer and cocatalyst  oncentrations and hydrogen were investig...

Bioslurry phase reactor augmented with ETP microflora was studied for the degradation of pendimethalin contaminated soil. The effect of substrate concentration on the process performance was evaluated in the slurry phase reactor operated in sequence batch mode under anoxic-aerobic-anoxic microenvironment with a total cycle period of 120 h. The performance of augmented slurry phase system was fo...

the aim of this paper is to enhance thermal performance of a microchannel heat sink by using nanoencapsulated phase change material (nepcm) slurry as a cooling fluid instead of pure fluid. a threedimensional model of a circular channel using water slurry of nepcm was developed. the results show a significant reduction in the mean fluid temperature along the channel and heat sink wall temperatu...

The paper presents the different properties of phase change material (PCM) and Microencapsulated phase change material (MEPCM) employed to cold storage/transportation system with a solar-driven cooling cycle. Differential Scanning Calorimeter (DSC) tests have been performed to analyze the materials enthalpy, melting temperature range, and temperature range of solidification. KD2 Pro is used to ...

The aim of this paper is to enhance thermal performance of a microchannel heat sink by using nanoencapsulated phase change material (NEPCM) slurry as a cooling fluid instead of pure fluid. A threedimensional model of a circular channel using water slurry of NEPCM was developed. The results show a significant reduction in the mean fluid temperature along the channel and heat sink wall temperatu...

A multicomponent one-dimensional dynamic mathematical model for the reacting slurry systems with a change in gas flow rate due to the chemical reaction is developed. A change in gas flow rate caused by the chemical reaction is modeled using the overall gas mass balance. Thus, all relevant chemical species are included in the model. Linear first-order reaction kinetics is considered. The gas pha...

in this paper, a cfd model of syngas flow in slurry bubble column was developed. the model is based on an eulerian-eulerian approach and includes three phases: slurry of solid particles suspended in paraffin oil and syngas bubbles. numerical calculations carried out for catalyst particles, bubble coalescence and breakup included bubble-fluid drag force and interfacial area effects. also, the ef...

The influence of dietary nutrient concentration on growth performance, manure composition, and gas emission was studied in pigs in hot environmental conditions. A total of 64 intact males and 64 females [(Landrace × Large White) × Pietrain] weighing 63.1 ± 9.7 kg were divided into 2 dietary treatments: high (HD: 14.39 MJ of DE/kg and 1.11% Lys) and low (LD: 13.97 MJ of DE/kg and 1.01% Lys) in e...

The direct synthesis process of dimethyl ether (DME) from syngas in slurry reactors is considered to be promising because of its advantages in caloric transfer. In this paper, the influences of operating conditions (temperature, pressure and weight hourly space velocity) on the conversion of CO, selectivity of DME and methanol were studied in a stirred autoclave over Cu-Zn-Al-Zr slurry catalyst...

In this paper, a CFD model of syngas flow in slurry bubble column was developed. The model is based on an Eulerian-Eulerian approach and includes three phases: slurry of solid particles suspended in paraffin oil and syngas bubbles. Numerical calculations carried out for catalyst particles, bubble coalescence and breakup included bubble-fluid drag force and interfacial area effects. Also, the ef...