In the present research, the influences of explosive welding parameters on the corrosion behavior of the three layer explosive welds of the tubes Al 5083 / Al 1050 / stcr18Ni9Ti in the salt environment was investigated. The selected parameters included the stand-off distance and the thickness of the explosive charge. Therefore, two samples A and B were welded with stand-off distances of 6 and 6...

In the present study, the effect of explosive welding stand-off distance on the structure and corrosion behavior of aluminum alloy 5083-copper joint is studied. The microstructure was examined by optical microscopy and scanning electron microscopy and corrosion behavior with poteniodynamic polarization tests and electrochemical impedance spectroscopy in a salt environment. Microscopic results s...

In the current research, the microstructural changes and corrosion behavior of two-layer Steel/Bronze sheets were investigated after the heat treatment of the explosive welding process. The heat treatment was performed at 600ºC for 16 hr. Dynamic potential polarization, electrochemical impedance spectroscopy, optical microscopy, and scanning electron microscopy analyses were used. Based on of t...

In this research, the effect of the amount of strain and rolling temperature on the microstructure and the hardness of the explosive bonding of 304 stainless steel- copper sheets was investigated. Explosive welding was performed with two explosive thickness (46 and 79 mm) and stand-off distance (2 and 3 mm). The results of the optical microscope after welding showed that all samples had a commo...