color metallography is a useful method for characterizing microstructures of steels with multiple phases. in this paper, application of three different color etching techniques for a bainitic-martensitic steel is reported. comparisons between the results showed that 10% na2s2o5 aqueous solution was the best etchant for distinguishing martensite, bainite and ferrite phases. the obtained microgra...

Color metallography is a useful method for characterizing microstructures of steels with multiple phases. In this paper, application of three different color etching techniques for a bainitic-martensitic steel is reported. Comparisons between the results showed that 10% Na2S2O5 aqueous solution was the best etchant for distinguishing martensite, bainite and ferr...

This paper deals with the possibility of reducing carbon content by heat treatment in reactive atmospheres in order to improve plastic deformations properties of steel sheets. The heat treatment involves a decarburation annealing after a cold rolling, as opposed to the traditional process that performs the heat treatment in non-reactive atmospheres. Some of the most relevant variables were stud...

Fig. 2 Microstructure of as-cast Au22%Al showing the “purple plague,” AuAl2 intermetallic (reddish), surrounded by the Al-AuAl2 eutectic after polishing to a 1 lm finish. Magnification bar is 50 lm long. Fig. 1 Microstructure of a porous high-carbon steel powder metallurgy specimen infiltrated with copper showing the natural color of the copper, which is easier to see when the steel has been ti...

Lawrence Livermore National Laboratory (LLNL) and Sandia National Laboratories, California (SNL) are collaborating on the development of new techniques to study damage evolution and growth in material specimens subjected to mechanical loading. These techniques include metallography, radiography, computed tomography (CT) and modeling. The material specimens being studied include cast magnesium a...

The Failure on tube rod arm cylinder hydraulic excavator caused to lose production and processing time mining site. Investigation included visual inspection, chemical analysis, metallography analyze, microhardness test. Tube material used high silicon type while the standard ST52 carbon steel type. was broken crack several pieces. composition of has different in sulfur content. From hardness te...