a nano/ultra-fine grain al-0.2wt% zr alloy was produced by accumulated roll bonding (arb) processafter 10 cycles. the fraction of high angle grain boundaries increased from 8% to 65.4% during 10passes during arb process. this alloy was subjected to tensile test at different temperatures (523,573and 623 k) and strain rates (0.1 and 0.01 s-1). the optimum condition of temperature and strain rate ...

In this work, dynamic mechanical properties of three high-manganese steels with TRIP/TWIP or fully TWIP characteristics are studied. High strain rate experiments in the range of true strain rates between ~500 and 1800 /s are conducted using a dynamic torsional testing setup. All the three steels show a positive strain rate sensitivity in the intermediate range of strain rates (up to 500 /s). Bu...

Among the titanium alloys, Ti-6Al-4V is the most widely used. In the present work, the uniaxial hot compressive behavior of Ti-6Al-4V has been investigated under constant strain rates. A series of dilatometery experiments were carried out to determine the transformation temperatures at different cooling rates. Specimens were homogenized at 1050 °C for 10 minutes followed by fast cooling to dif...

in this work, dynamic mechanical properties of three high-manganese steels with trip/twip or fully twip characteristics are studied. high strain rate experiments in the range of true strain rates between ~500 and 1800 /s are conducted using a dynamic torsional testing setup. all the three steels show a positive strain rate sensitivity in the intermediate range of strain rates (up to 500 /s). bu...

Among the titanium alloys, Ti-6Al-4V is the most widely used. In the present work, the uniaxial hot compressive behavior of Ti-6Al-4V has been investigated under constant strain rates. A series of dilatometery experiments were carried out to determine the transformation temperatures at different cooling rates. Specimens were homogenized at 1050 °C for 10 minutes followed by fast cooling to dif...