austenite is a semi-stable phase in most stainless steels that deforms to martensite under md30 and forms martensitetype ά and ε due to the deformation in the steels. since the distribution of strain induced martensite plays animportant role in achieving desired properties, the main objective of the present work is to model martensitedistribution of ά during cold rolling using finite element me...

In this research, the effects of notch shape on the fatigue strength of 2024-T3 aluminum alloy notched specimens have been studied using experimental and multiaxial fatigue analysis. For this purpose, four set of specimens with different notch shape were prepared and then fatigue tests were carried out at various cyclic longitudinal load levels. Load controlled fatigue tests of mentioned specim...

This research develops thermo-elastic analysis of a functionally graded cylinder under thermo-mechanical loadings. Heat conduction equation in cylindrical coordinate system is solved. Thermal conductivity coefficient is graded along the radial direction. By considering a symmetric distribution of temperature, loading and boundary conditions, strain-displacement and stress-strain relations can b...

this research develops thermo-elastic analysis of a functionally graded cylinder under thermo-mechanical loadings. heat conduction equation in cylindrical coordinate system is solved. thermal conductivity coefficient is graded along the radial direction. by considering a symmetric distribution of temperature, loading and boundary conditions, strain-displacement and stress-strain relations can b...

this research was conducted in order to evaluate fatigue behavior of asphalt mixes containing electric arc furnace (eaf) steel slag. after initial evaluation of the properties of eaf steel slag using x-ray diffraction (xrd) and scanning electric microscope (sem), six sets of laboratory mixtures were prepared. each set were treated replacing various portions of limestone aggregates of the mix wi...

An analytical method for predicting elastic–plastic stress distribution in a cylindrical pressure vessel has been presented. The vessel material was a ceramic/metal functionally graded material, i.e. a particle–reinforcement composite. It was assumed that the material’s plastic deformation follows an isotropic strain-hardening rule based on the von-Mises yield criterion, and that the vessel was...

Introduction: The restoration material commonly used as core material for pulpless posterior teeth is mostly amalgam due to its high strength and low cost and it can be used with or without pin. The aim of this study was to evaluate the influence of post material on stress distribution in mandibular second premolar tooth by finite element analysis. Method: The stress distribution was analyzed i...

A modified continuum composite model was utilized to analyze the stress–strain behavior of as-quenched steels with a fully martensitic microstructure. The employed express curves obtained by simple tensile test and those forward backward loading using shear machine. study confirmed that can represent under both deformation. In addition, evolution local strain distributions during plastic deform...

The present study aims to investigate the analysis of stress, strain, displacement, and electrical potential of a thick hollow cylinder made of FGPM under mechanical and thermal loads. Distribution of mechanical property of material is considered along the shell stick through the power distribution function. Thermal loads have been taken to signify the difference of temperature between outer an...