On wave-swept rocky shores, limpets are subjected to water velocities in excess of 20 m s(-1), which may impose large hydrodynamic forces. Despite the extreme severity of this flow environment, predictions from conical models suggest that limpets' shells are typically far from the optimal shape that would minimize the risk of dislodgment, a deviation that is allowed by the high tenacity of the ...

Two-point incremental forming method is considered a modern technique for manufacturing shell parts. The presence of bottom punch during the process makes this technique far more complex than its conventional counterpart i.e. single-point incremental forming method. Thus, the numerical simulation of this method is an essential task, which leads to the reduction of trial/error costs, predicts th...

in this paper, dynamic analysis of the composite truncated sandwich conical shells (stcs) with various boundary conditions subjected to low velocity impact was studied analytically, based on higher order sandwich panel theory. impact was assumed to occur normally over to the top face-sheet and the contact force history is predicted using two solution models of the motion are derived based on ha...

In this paper, the dynamic analysis of the composite sandwich truncated conical shells (STCS) with various boundary conditions subjected to the low velocity impact was studied analytically, based on the higher order sandwich panel theory. The impact was assumed to occur normally over the top face-sheet, and the contact force history was predicted using two solution models of the motion which we...

Objective: The use of miniature X-ray source in electronic brachytherapy is on the rise so there is an urgent need to acquire more knowledge on X-ray spectrum production and distribution by a dose. The aim of this research was to investigate the influence of target thickness and geometry at the source of miniature X-ray tube on tube output.Method: Five sources were simulated based on problems e...

SUMMARY This Report considers theoretically and experimentally some of the problems associated with the flexure of two unequal cylindrical shells Joined by a conical frustum. Particular attention is given to the determination of the overall flexursl stiffness of the conical frustum and to structural design considerations associated with the provision of a separation capability in the frustum. T...