A Fabry-Perot wavemeter for analyzing a pulsed laser operating in a single longitudinal mode with an injection-seeding technique has been constructed with an array detector. This wavemeter permits the real-time measurement of both the wavelength and the spectral effectiveness of the laser pulse produced at 10 Hz. The performance of the wavemeter is checked with a frequency-stabilized He-Ne lase...

We designed, fabricated, and characterized an integrated chip-scale wavemeter based on an unbalanced Mach– Zehnder interferometer with 300 MHz free spectral range. The wavemeter is realized in the Si3N4 platform, allowing for low loss with ∼62 cm of on-chip delay. We also integrated an optical hybrid to provide phase information. The main benefit of a fully integrated wavemeter, beside its smal...

A Michelson wavemeter was developed to test the accuracy and give traceability to the wavelength of external cavity diode lasers. These lasers were stabilized using a Littrow configuration and an iodine gas cell as frequency reference, and they were used as light sources in the assembly of a new interferometric system for the gauge block calibration. Previously, a microcontroller counting devic...

We describe the construction and operation of a simple, compact, and cost effective Michelson wavemeter with picometer accuracy. The low cost of the device means that it can form the basis of an undergraduate laboratory experiment, yet it is sufficiently reliable and accurate that it has become an important tool in our research laboratory, where it is regularly used to tune lasers to atomic tra...

The accurate determination and control of the wavelength of light is fundamental to many fields of science. Speckle patterns resulting from the interference of multiple reflections in disordered media are well-known to scramble the information content of light by complex but linear processes. However, these patterns are, in fact, exceptionally rich in information about the illuminating source. ...

We have built a high-accuracy wavelength meter for tunable lasers using a scanning Michelson interferometer and a reference laser of known wavelength. The reference laser is a frequency stabilized diode laser locked to an atomic transition in Rb. The wavemeter has a statistical error per measurement of 5 parts in 10 which can be reduced considerably by averaging. Using a second stabilized diode...

We present a design concept for speckle-based wavemeter that combines high spectral resolution and fast response times. Our device uses fixed disperse medium with small coherence length as an optical pre-processor series of programmable elements post-processor. The generates complex speckle pattern given correlation length, then the post-processor transforms field to simple binary intensity pro...