This paper focuses on the wind energy conversion system (WECS) with the three main electrical aspects: 1) wind turbine generators (WTGs), 2) power electronics converters (PECs) and 3) grid-connection issues. The current state of wind turbine generators are discussed and compared in some criteria along with the trends in the current WECS market, which are ‘Variable Speed’, ‘Multi-MW’ and ‘Offsho...

Hydrogen diffusion during rolling contact fatigue (RCF) is considered a potential root cause or accelerator of white etching cracks (WECs) in wind turbine gearbox bearing steels. Hydrogen entry into the bearing steel during operation is thought to occur either through the contact surface itself or through cracks that breach the contact surface, in both cases by the decomposition of lubricant th...

Hydrogen diffusion during rolling contact fatigue (RCF) is considered a potential root cause or accelerator of white etching cracks (WECs) in wind turbine gearbox bearing steels. Hydrogen entry into the bearing steel during operation is thought to occur either through the contact surface itself, or through cracks that breach the contact surface, in both cases by the decomposition of lubricant t...

This study proposed a cost effective method of wind energy conversion system (WECS) incorporating permanent magnet generator (PMG) and single stage power converter. Axial flux PMG can generate rated voltage and frequency even at a lower speed and hence more suitable for direct drive WECS. To get desired voltage and frequency in continuously varying wind conditions, a new type of WECS with singl...

A wind energy conversion system (WECS) including a variable wind turbine in grid-connected mode is considered to control. In this paper, each component of WECS model is systematically presented and then the integrated overall model is validated.Regarding to nonlinear nature of WECS and the complex system structure as multiple-input multiple-output (MIMO), it is difficult to find a proper contro...

The paper presents an electromechanical auto synchronized wind energy conversion system (WECS) for larger penetration of renewable energy sources (RES) in the rural electrification systems. The architecture of the WECS uses two stator windings at power frequency which provides harvesting of power to flow from WECS to load and to grid side when the generated power is in access. Asymmetrical six ...

This paper proposes a new method for online estimation of the induction generator parameters by means of adaptive neuro-fuzzy inference systems (ANFIS). The suggested technique can be applied to induction generators that are used in wind energy conversion systems (WECS). The WECS structure comprises a wind turbine, a three-phase induction generator and two back-to-back power converters. The WEC...

The aim was to evaluate 2 levels of dietary inclusion of chopped whole-ear corn silage (WECS) on energy and nutrient utilization, growth, and slaughter performances of heavy pigs. Two in vivo experiments were conducted to determine digestibility and metabolic utilization of WECS using 18 barrows weighing 118 ± 8 kg BW on average, metabolic cages and respiration chambers (Exp. 1), and the effect...

In recent years, there has been a fast growth in wind energy conversion system (WECS). There are two general types of wind turbines in WECS: fixed speed wind turbines and varying speed wind turbines.Permanent magnet synchronous generator (PMSG) is one of the most attractive generators for the varying speed turbine WECS.In this paper, a fuzzy controller is proposed to control the current source ...

In the overall process of utilizing wind power, two essential components of technical data, i.e. one related to the engineering or performance characteristics of commercially available wind turbine generators, and the other related to the availability of wind resources, are needed. The performance of wind energy conversion systems (WECs) depends upon subsystems like wind turbine (aerodynamic), ...