نتایج جستجو برای: electric transformer
تعداد نتایج: 154144 فیلتر نتایج به سال:
Abstract: The widespread presence of uncontrolled electric vehicles causes overloading of distribution network equipment. One of these equipments is distribution transformer, which should pay attention to overloading and reducing lifetime of this equipment due to charging of electric vehicles. First, strategies have been proposed to investigate the effect of electric vehicle penetration level a...
| This paper deals with design improvements on graded insulation of power transformers using transient electric eld analysis and a visualization technique. The calculation method for transient electric eld analysis inside a power transformer impressed with impulse voltage is presented: Initially, the concentrated electric network for the power transformer is constructed by dividing transformer ...
A contactless power transfer system for charging electric vehicles requires a high efficiency, a large air gap, and a good tolerance to lateral misalignment and needs to be compact and lightweight. A double-sided winding 10 kW transformer based on a 1.5 kW H-shaped core transformer was developed for a rapid charger. Even though the transformer capacity was increased, the dimensions of the 10 kW...
The absorption refrigerator can be considered a thermal transformer, that is, a device that is analogous to the electric transformer. The analogy is based on the correspondence between the extensive quantities, entropy and electric charge and the intensive variables, temperature and electric potential.
Transformer is one of the most important components of power system, which determining its reliability is very important. To evaluate transformer overall reliability, in addition to probability of failures occur due to chance events, the probability of failures owing to aging should be taken into account. To determine transformer reliability in aging area, estimating its remaining life is of gr...
This paper is about the thermal diagnosis and control of electric machines or transformer using a Thermal image camera, color sensor, a microcontroller and a PLC. A color sensor is developed which respond to the colors of thermographic images and when overheating or Hot spot occurs it automatically give alarm signal or it can be used to switch off the electric machines or transformer.
This paper presents a study to estimate the composition of an electric load, i.e. to determine the amount of each load class by the direct measurements of the total electric current waveform from instrument reading. Kalman filter algorithm is applied to estimate the electric load composition on a consumer side of a distributed power system. The electric load supplied from the different voltage ...
Paper presents electric and magnetic field computation of 35 kV voltage level of transformer substation 35/10 kV using CDEGS software. Based on well known theoretical considerations of electric and magnetic fields, a realistic simulation model of transformer station 35/10 kV was develop. All calculations are made for horizontal plane with height of 1,5 m above the soil changing coordinates alon...
in this paper are present the results of measurements of magnetic induction at some locationsin city bor (the east serbia) dating from the household electric devices and transformer stations suited near the residental areas. stress is on the extremely low frequent electromagnetic radiation from transformer stations and other high voltage instalations in urban areas. risk of the extremely low fr...
Energizing of large power transformers is considered a critical event in the operation of an electric power system. When a transformer is energized by the grid or utility, it takes very high value current known as inrush current, the typical value of this current could be ten times. This inrush causes many problems like mechanical stress on transformer & harmonics injection to generator winding...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید