سند علمی

Discrete Particle Simulation of Gas-Solid Two-Phase Flows with Multi-scale CPU-GPU Hybrid Computation

چکیده

Though discrete particle simulation (DPS) has been widely used for investigating gas-solid flows from a more detailed level as compared to traditional two-fluid models (TFM), it is still seriously limited by the computational cost when large scale systems are simulated. GPUs (graphic processing units), with their massive parallel architecture and high floating point performance, provide new possibilities for large-scale DPS. In this paper, a multi-scale CPU (central processing unit)-GPU hybrid computation mode is developed, in which the fluid flow is computed by CPU(s) while the particle motion is computed by GPU(s). To explore its feasibility, this mode is adopted to simulate the flow structures in the fluidization of Geldart D and A particles, respectively. Further coupled with an EMMS (energy minimization multi-scale) based meso-scale model, the flow behavior in an industrial fluidized bed is finally simulated, shedding light on the engineering applications of DPS, as an alternative to TFM.

اسناد مشابه

  • CFD Simulation of Gas-Solid Two-Phase Flow in Pneumatic Conveying of Wheat

    مقاله۲۰۱۵Iranian Journal of Chemistry and Chemical EngineeringAli Sarrami Foroushani, Mohsen Nasr Esfahany

    Computational Fluid Dynamics (CFD) simulations of gas-solid flow through a positive low-pressure pneumatic conveyor were performed using Eulerian-Eulerian framework. Pressure drop in pneumatic conveying pipelines, creation and destruction of plugs along the horizontal and vertica

  • cfd simulation of gas-solid two-phase flow in pneumatic conveying of wheat

    مقاله۲۰۱۵iranian journal of chemistry and chemical engineering (ijcce)ali sarrami foroushani, mohsen nasr esfahany

    computational fluid dynamics (cfd) simulations of gas-solid flow through a positive low-pressure pneumatic conveyor were performed using eulerian-eulerian framework. pressure drop in pneumatic conveying pipelines, creation and destruction of plugs along the horizontal and vertica

  • A self-consistent physical model of the bubbles in a gas solid two-phase flow

    سند علمی۲۰۱۸H. M. Dong, J. F. He, C. L. Duan, Y. M. Zhao

    In this work, we develop a self-consistent physical model of bubbles in a gas solid two-phase 1 flow. Using the Peng-Robonson state equation and a detailed specific heat ratio equation of bubbles, 2 we obtain the kinetic equations of the bubbles on the basis of the Ergun equation

  • Numerical Simulation and Mechanistic Analysis of Gas–solid Two-phase Flow Characteristics under Various Swirl Blade Twist Angles

    مقاله۲۰۲۶Journal of Applied Fluid MechanicsB. Hu, G. Yang, X. Wang, S. Wang

    This study systematically investigated the complex flow patterns of gas–solid mixed jets and the underlying mechanisms inducing secondary flow within tangential swirl lances. A Computational Fluid Dynamics–Discrete Element Method(CFD-DEM) numerical simulation framework, incorpora

  • Self-Consistent Physical Model of the Bubbles in a Gas-Solid Two-Phase Flow

    سند علمی۲۰۱۷H. M. Dong, J. F. He, C. L. Duan, Y. M. Zhao

    In this work, we develop a self-consistent physical model of bubbles in a gas-solid 1 two-phase flow. Based on PR state equation, and a detailed specific heat ratio equation of bubbles, 2 we self-consistently evaluate kinetic equations of the bubbles on the basis of Ergun equatio

  • Modeling of soot particle collision and growth paths in gas-solid two-phase flow

    مقاله‌ی دسترسی آزاد۲۰۲۱Thermal Science['Hongling Ju', 'Fanquan Bian', 'Mingrui Wei', '']

    Particle collision is an important process in soot particle growth. In this research, based on gas-solid two-phase flow, trajectory was traced by the Lagrange approach with periodic boundaries. Trajectory intersection, probability, and critical velocity were considered, growth pa