Application of Box Behnken Design to Optimize the Parameters to Synthesis Graphene by CVD Process

نویسندگان

  • Ahmad Ghozatloo Research Institute of Petroleum Industry (RIPI), West Blvd. Azadi Sport Complex, Tehran, I. R. Iran
  • Ali Morad Rashidi Research Institute of Petroleum Industry (RIPI), West Blvd. Azadi Sport Complex, Tehran, I. R. Iran
  • Mojtaba Shariaty Niassar2 Transport phenomena and Nanotechnology Laboratory, Department of Chemical Eng, University of Tehran, Tehran, I. R. Iran
  • Zeynab Hajjar Research Institute of Petroleum Industry (RIPI), West Blvd. Azadi Sport Complex, Tehran, I. R. Iran
چکیده مقاله:

This paper discusses the use of Box Behnken design (BBD) approach to plan the experiments for turning the yield of CVD, thickness and layer number of graphene sheets with an overall objective of optimizing the process to provide higher graphene production volume, fewer layers and thinness structure of graphene. BBD is having the maximum efficiency for an experiment involving four factors such as total gas flow, gas ratio (H2/CH4), temperature, and reaction time in three levels. The proposed BBD requires 25 runs of experiment for data acquisition and modeling the response surface. Three regression models were developed and their adequacies were verified to predict the output values at nearly all conditions. Further, the models were validated by performing experiments, taking three sets of random input values. The output parameters measured through experiments (actual) are in good consistency with the predicted values using the models. This work resulted in identifying the optimized set of turning parameters for CVD process to achieve high yield value and good structure of graphene. In the best condition, yield of process is 6.1%.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

application of box behnken design to optimize the parameters to synthesis graphene by cvd process

this paper discusses the use of box behnken design (bbd) approach to plan the experiments for turning the yield of cvd, thickness and layer number of graphene sheets with an overall objective of optimizing the process to provide higher graphene production volume, fewer layers and thinness structure of graphene. bbd is having the maximum efficiency for an experiment involving four factors such a...

متن کامل

Application of the Box-Behnken design to the optimization of process parameters in foam cup molding

Currently, foam molding technologies are widely adopted for most bra styles, which demonstrate the incomparable advantages in the contemporary intimate apparel industry. The determination of proper molding conditions, such as molding temperatures and length of time on the basis of cup sizes and styles, is crucial in achieving the required cup shape with high stability, which is regarded as the ...

متن کامل

Application of Box Behnken design to optimize the parameters for turning Inconel 718 using coated carbide tools

This paper discusses the use of Box Behnken design approach to plan the experiments for turning Inconel 718 alloy with an overall objective of optimizing the process to yield higher metal removal, better surface quality and lower cutting forces. Response Surface methodology (RSM) has been adopted to express the output parameters (responses) that are decided by the input process parameters. RSM ...

متن کامل

Application of Experimental Design to Optimize the Synthesis of CdO Cauliflower-like Nanostructure Using Mechanochemical Method

Cauliflower-like nanostructure of cadmium oxide was synthesized by utilizing mechanochemical reaction followed calcination procedure for the first time. The design of experiment (DOE) by Taguchi method was used to study influence of the chosen factors and to consider optimum conditions of the experiments. The temperature of calcining, the duration of milling, the duration of calcining and react...

متن کامل

Optimization of process parameters for COD removal by Coagulation Treatment using Box–Behnken design

Coagulation treatment of sago wastewater was studied and laboratory studies were carried out using alum as coagulant. Coagulation treatment conditions were optimised through response surface methodology (RSM). Operational parameters namely dosage of alum (Al [email protected]

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 49  شماره 2

صفحات  91- 99

تاریخ انتشار 2015-12-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023